DataStor Epson PowerLite 710HD UHE 200W 2000Hr Projector Lamp
Genuine compatible replacement lamp with 200 W UHE bulb rated for 2,000 hours, supplied fully assembled for easy installation
- Power rating200 W
- Lamp lifespan2,000 Hrs.
- Product typeUHE
- Genuine compatible ELPLP67 module installs instantly
- UHE 200W bulb delivers 2000-hour rated life
- ISO 9001 manufacturing ensures consistent beam performance
- Each unit tested for ignition voltage and run-time
- Ready-to-fit housing eliminates separate bulb handling
Ready-to-install UHE lamp module
This DataStor replacement module fits the Epson PowerLite 710HD projector and arrives with the 200W UHE bulb already seated in its housing. The assembly matches the ELPLP67 form factor so no separate bulb handling is required during installation.
ISO9001 manufacturing and 2000-hour rating
Every unit is produced to ISO9001 quality standards and tested for beam performance, ignition voltage, connections and run-time before shipping. The 200W UHE lamp is rated for 2000 hours of typical use.
Verify ELPLP67 compatibility before ordering
Confirm that your projector uses the ELPLP67 lamp code; other PowerLite models may require a different module. The package contains only the lamp assembly — no tools or additional hardware are included.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $68.99
- Cheaper than about 82% of the 9,513 comparable items (median $99.99).
- Power rating 200 W
- Lower than about 60% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Brand name | EPSON |
| Product type | UHE |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 200 W |
Questions about this item
What lamp interface does the ELPLP67 module use, and what wattage does it cap at?
The ELPLP67 module uses the projector's proprietary lamp connector and is capped at 200W by the UHE bulb design.
What physical clearance does the ELPLP67 housing need to fit inside the PowerLite 710HD?
The ELPLP67 housing is built to the exact chassis dimensions of the PowerLite 710HD, so it seats directly in the lamp compartment without adapters.
How is the ELPLP67 module installed, and which step do users often miss?
Power off and cool the projector, open the lamp cover, release the securing screws, swap the module, re-tighten the screws, close the cover, then reset the lamp-hour counter in the menu.
More in Replacement Projector Bulbs
Similar items
Toshiba TDP-X35U projector lamp 180W UHP 2000/3000 hrs
- 180 W
- 2,000 (Normal) - 3,…
Hitachi, Ltd. CP-X4030WN projector lamp 225W
- 225 W
- 5,000 (Normal) - 6,…





