DataStor Projector Lamp ELPLP58 UHE 200W 4000 Hrs
Genuine compatible replacement lamp module with 200W UHE bulb and housing, rated for 4000 hours
- Power rating200 W
- Lamp lifespan4,000 Hrs.
- Product typeUHE
- Ready-to-install module saves setup time
- UHE 200W bulb delivers rated brightness
- 4000-hour lamp life extends replacement interval
- ISO9001 manufacturing ensures consistent quality
- Compatible with Epson ELPLP58 projectors
Epson ELPLP58 UHE Lamp
This replacement lamp module fits Epson projectors that use the ELPLP58 part number. It contains a 200W UHE bulb pre-mounted in its housing for direct installation. The lamp is rated for 4,000 hours of typical use. Buyers needing a different connector or wattage should verify their projector model first.
Replaces dim or failed ELPLP58 modules
Swap this unit when the original lamp reaches end of life or brightness drops below usable levels. The upgrade is worthwhile when image quality suffers in normal lighting conditions. Projectors requiring a different lamp code or higher lumen output cannot use this module.
Pre-assembled housing for tool-free fitting
The bulb ships already seated in the cage so no alignment or screw-down of the bare burner is required. Most installations finish in minutes by opening the lamp door and sliding the module into place. Forcing the connector or skipping the projector’s reset counter are the common errors that prevent the new lamp from striking.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $65.99
- Cheaper than about 87% of the 9,513 comparable items (median $99.99).
- Power rating 200 W
- Lower than about 60% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Brand name | EPSON |
| Product type | UHE |
| Display | |
| Lamp lifespan | 4,000 Hrs. |
| Power | |
| Power rating | 200 W |
Questions about this item
Will the ELPLP58 lamp module fit directly into my Epson projector without extra brackets?
The ELPLP58 ships as a complete bulb-and-housing assembly built to the projector's original dimensions, so it slides into the lamp bay without additional brackets or adapters.
What is the installation step users most often miss when fitting the ELPLP58?
After inserting the module, the lamp-hour counter must be reset through the projector menu; otherwise the projector will continue tracking the old lamp's hours and may shut down early.
How often will the ELPLP58 need replacement under typical use?
The UHE 200W lamp is rated for 4000 hours; at four hours a day that equals roughly two and a half years before a new module is required.
More in Replacement Projector Bulbs
Similar items
Hitachi, Ltd. CP-X3041WN Projector Lamp 225W DT01481
- 225 W
- 5,000 (Normal) - 6,…





