DAYCO 17405 Auto V-Belt 13A1030 40.5 In .53 In
Cogged automotive V-belt with 40.5 inch outside length and .53 inch top width, industry number 13A1030
- Product colorTransparent
- Cogged design improves grip and reduces slip
- 5 inch outside length fits specified drive systems
- 53 inch top width matches industry number 13A1030
- Dayco 17405 construction delivers reliable power transmission
- New condition ensures full service life from installation
DAYCO 17405 Auto V-Belt 13A1030
The DAYCO 17405 is a cogged automotive V-belt designed for engine accessory drives. It suits mechanics and vehicle owners replacing a worn belt on compatible applications. Buyers needing a serpentine belt or a different cross-section should verify their requirements before ordering.
Industry Number 13A1030 with 40.5 In length
This belt carries industry number 13A1030 and measures 40.5 inches in outside length with a top width of .53 inches. The cogged profile provides flexibility for smaller pulley diameters. It will not fit drives specifying a longer or shorter outside length or a different top width.
Thermals noise and power draw in normal use
As a passive rubber component the belt generates no noise of its own and draws no electrical power. Operating temperature follows the engine environment and the belt is rated for standard automotive heat cycles. Improper tension or misalignment can cause premature wear or squeal.
How it compares
Measured against everything we stock in Engine Service & Diagnostic Tools, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 67% of the 1,113 comparable items (median $19.99).
Specifications
| Product | |
|---|---|
| Brand name | DAYCO |
| Product color | Transparent |
Questions about this item
Will the 13A1030 belt fit the same pulleys as my old 40.5-inch V-belt?
Yes, the DAYCO 17405 has a 40.5-inch outside length and 0.53-inch top width, matching industry number 13A1030 specifications for direct replacement.
How can I confirm the cogged belt is seated correctly after installation?
Check that the cogs engage fully in the pulley grooves, the belt runs straight without twisting, and tension allows roughly half-inch deflection mid-span under thumb pressure.
Does the DAYCO 17405 come with tensioner hardware or just the belt?
The box contains only the single cogged V-belt; tensioner pulleys, bolts or installation tools must be sourced separately if your service requires them.
More in Engine Service & Diagnostic Tools
