We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Translucent polycarbonate fuel filter housing with aluminum head 1 inch NPT ports

Dayton

Dayton 12F728 Fuel Filter 10 Micron Translucent Housing

SKU CH-BC29-HK0KG

A translucent fuel filter housing with a 10 micron cartridge for 1 inch NPT lines, rated to 150 psi and 140 degrees F

  • Product typeFilter
  • Translucent housing lets you see filter condition
  • 10 micron rating traps fine contaminants
  • 20 GPM flow supports high-demand systems
  • 150 PSI max pressure handles tough jobs
  • Aluminum head resists corrosion for durability

Fuel Filter 10 Micron Translucent Housing

The Dayton 12F728 is a fuel filter with a 10 micron rating and a translucent polycarbonate housing. It uses 1 inch NPT connections and fits electric fuel pumps and gravity flow applications. The aluminium head supports a maximum pressure of 150 psi and a maximum temperature of 140 degrees Fahrenheit. Buyers needing a finer micron rating or a different port size should look elsewhere.

Thermals Noise Power Draw

The filter handles flow rates up to 20 GPM within the stated pressure and temperature limits. The polycarbonate housing and aluminium head manage heat from the fuel passing through without active cooling. No moving parts mean the unit adds no audible noise to the system. Installations that exceed 150 psi or 140 degrees Fahrenheit are not supported.

Bundled Accessories Software

A 10 micron contaminant filter cartridge is included so the unit is ready for installation. The translucent housing lets the operator see the element condition without disassembly. California Proposition 65 warnings note the presence of chemicals known to cause cancer and birth defects or other reproductive harm. No additional software or mounting hardware is mentioned in the data.

How it compares

Measured against everything we stock in Filter Cartridges & Water Dispensers, at today’s prices. Recalculated every night.

Price $39.99
Cheaper than about 54% of the 193 comparable items (median $44.99).

Specifications

Product
Brand nameDayton
Product typeFilter

Questions about this item

How do I install the 12F728 filter without cross-threading the 1 in NPT ports?

Apply PTFE tape to the male threads, hand-tighten the housing into the 1 in NPT ports, then snug with a wrench — do not overtighten the polycarbonate bowl.

When should I replace the 10 micron cartridge inside the 12F728?

Swap the cartridge when flow drops below 20 GPM or the translucent bowl shows visible sediment buildup.

What is the first limit reached if the 12F728 runs continuously at full flow?

The 150 psi pressure ceiling is reached before the 140 °F temperature limit under sustained 20 GPM operation.

More in Filter Cartridges & Water Dispensers

Similar items