We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three aluminium fan blades 36 inches diameter 5/8 inch bore

Dayton

Dayton 23NU11 36 in replacement blade 1/2 hp 850 rpm 3 blade

SKU CH-KC6B-F54CX

36-inch aluminum propeller blade with 5/8-inch bore fits 1/2 hp motors at 850 rpm

  • Product typeClosed Base
  • 36-inch span moves more air per revolution
  • Three aluminium blades keep weight low for direct-drive efficiency
  • 1/2 hp rating matches motor output at 850 rpm
  • 5/8-inch bore fits 2RDZ3 hub without adapters
  • Aluminium construction resists corrosion in humid environments

36-inch replacement blade for 1/2 hp motors

This Dayton 23NU11 propeller measures 36 in across and mounts on a 5/8 in bore. It carries three aluminum blades rated for 850 rpm direct-drive operation. The part is built to fit the 2RDZ3 motor assembly.

Steady 850 rpm airflow without belt losses

Direct drive locks the blade to the motor shaft so speed stays constant at 850 rpm under load. Aluminum construction keeps rotational mass low for quick response when the motor ramps. The closed-base design maintains blade pitch through continuous duty cycles.

Aluminum blades resist corrosion in humid settings

The 5/8 in bore slides onto the matching shaft and secures with standard hardware. Three blades balance airflow and static pressure for the intended 1/2 hp rating. Propeller diameter and blade count are fixed, so the unit drops in without alignment adjustments.

How it compares

Measured against everything we stock in Fan Motors, Parts & Clip-On Fans, at today’s prices. Recalculated every night.

Price $88.99
Pricier than about 64% of the 473 comparable items (median $38.99).

Specifications

Product
Brand nameDAYTON
Product typeClosed Base

Questions about this item

How much noise and heat does the 1/2 hp 850 rpm motor produce during continuous operation?

The 1/2 hp motor runs at 850 RPM with three aluminum blades; typical industrial direct-drive fans at this speed generate moderate airflow noise and minimal motor heat under normal load.

What existing fan assembly is required to mount the 36 in blade with a 5/8 in bore?

This replacement blade fits a 5/8 inch (15.87 mm) bore shaft and is designed for use with the Dayton 2RDZ3 motor assembly; verify your motor matches that specification before installing.

Will the 36 in three-blade propeller work with an older Dayton motor rated below 1/2 hp?

The blade is engineered for a 1/2 hp, 850 RPM direct-drive motor; using it on a lower-horsepower unit may reduce airflow and could overload the motor, so match the original 2RDZ3 specs for proper performance.

More in Fan Motors, Parts & Clip-On Fans

Similar items