Dayton 26ZT29 Tower Light 56mm Steady/Flash Red Yellow Green
A 56 mm tower light with red, yellow and green LEDs for steady or flashing traffic and parking-lot signalling
- Product typeTraffic & Parking Lot
- Visible warnings in all conditions with steady and flashing red, yellow and green LEDs
- Reliable long-term operation backed by 30,000 hour LED life
- Withstands weather and dust with IP65 rated ABS housing and polycarbonate lens
- Flexible installation on 90 to 240 VAC supply with 20 inch cord and support tube mount
- Clear signalling at 80 flashes per minute in temperatures from -15 to 40 degrees C
Tower Light 56mm Red Yellow Green
The Dayton 26ZT29 tower light uses red, yellow and green LEDs in a 56 mm cylinder lens to provide steady or flashing signals for traffic and parking lot management. It operates on 90 to 240 VAC and draws 0.04 to 0.053 A at 2.76 to 3.22 W.
Suits facility managers needing IP65 rated
This unit is built for outdoor traffic and parking lot applications where an IP65 enclosure and a -15 to 40 °C operating range are required. It is not intended for buyers who need a different colour combination, a larger diameter lens, or a lower voltage DC supply.
Steady and flashing modes with 80 flashes per minute
The light switches between steady and flashing operation at a fixed rate of 80 flashes per minute. This single mode parameter determines whether the signal timing matches the site specification.
How it compares
Measured against everything we stock in Traffic Cones, Signs & Safety Gear, at today’s prices. Recalculated every night.
- Price $128.99
- Pricier than about 74% of the 1,503 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Product type | Traffic & Parking Lot |
Questions about this item
Does the 90 to 240VAC tower light need a separate power supply or can it connect directly to mains?
It connects directly to a 90 to 240VAC supply; no external power supply is required.
Will the 56mm cylinder lens fit onto an existing support-tube bracket I already have?
The unit mounts via a support tube; compatibility depends on your bracket's tube diameter and thread.
How can I confirm the red, yellow and green LEDs are flashing at the correct rate after installation?
Count the flashes — each colour should cycle at 80 flashes per minute in flashing mode.
More in Traffic Cones, Signs & Safety Gear
Similar items
Brady Spc Absorbents MRO50 Sorbent Pad 30x30 in 41 gal 50 pack traffic safety equipment
- Gray





