We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton grinding wheel dresser, metal body, spur cutters, 8-1/2 inch length

Dayton

Dayton 2X951 Grinding Wheel Dresser 1-1/4 inch

SKU CH-GGRN-RQTCH

Dresses grinding wheels up to one inch wide using a 1-1/8 inch steel spur cutter

  • Restores wheel profile with spur cutter design
  • Works on straight wheels 1/2 to 1 inch wide
  • Steel cutter resists wear during repeated dressing
  • Compact 8-1/2 inch length fits tight workspaces
  • Free shipping on orders of $75 or more

Grinding Wheel Dresser for Bench Grinders

The Dayton 2X951 is a cutter-style spur dresser made to true and clean straight abrasive wheels on bench or pedestal grinders. It suits maintenance technicians, tool-room staff and metalworkers who need to restore cutting performance without replacing the wheel.

Manual Operation Keeps Heat and Noise Low

Because the tool is hand-fed against a spinning wheel, it adds no electrical load, produces no motor noise and generates only the friction heat normal to dressing. The steel cutters handle the contact forces while the operator controls pressure and feed rate directly.

Four Replaceable Steel Cutters Extend Service Life

The dresser comes with a set of four 1-1/8 inch diameter cutters, each 1/2 inch wide, that can be rotated or swapped when worn. This reduces downtime and avoids the cost of buying a whole new dressing tool when the cutting edges dull.

How it compares

Measured against everything we stock in Sanders, Rotary & Demolition Tools, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 63% of the 477 comparable items (median $21.99).

Specifications

Product
Brand nameDAYTON

Questions about this item

How do I install the Dayton 2X951 dresser on my bench grinder, and what is the common mistake?

Mount the dresser so the steel spur cutters contact the wheel face squarely; the step most users miss is setting the tool rest to keep the 1/2 in cutter face fully engaged across the wheel width.

What part of the dresser will need replacement after extended use?

The steel spur cutters wear down with repeated dressing; once the cutter edges dull or the 1/8 in diameter reduces noticeably, the dresser must be replaced.

What is the first limitation I will hit when dressing wheels continuously?

The dresser only accepts straight wheels between 1/2 in and 1 in wide; wider or tapered wheels cannot be dressed with this tool.

More in Sanders, Rotary & Demolition Tools

Similar items