We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton split-phase motor open drip-proof steel frame C-face mount

Dayton

Dayton 6XH52BG Belt Drive Motor Split-Phase ODP 1/2HP 1725rpm

SKU CH-810S-SJZNS

Split-phase 1/2 hp motor runs at 1725 rpm on 115 V AC for fan and blower duty

  • 1/2 hp power drives fans and blowers efficiently
  • Split-phase single-phase design suits standard 115 V AC supply
  • 1725 rpm nameplate speed matches common HVAC requirements
  • Open drip-proof enclosure protects windings in dry indoor areas
  • 25 service factor allows continuous duty at 40 °C ambient

Motor Specifications

The Dayton 6XH52BG is a 1/2 hp belt-drive motor built for fan and blower applications. It runs on 115V AC single-phase power at 60 Hz and delivers a nameplate speed of 1,725 RPM. The split-phase design provides continuous-duty operation with a 1.25 service factor for demanding HVAC tasks.

Upgrade Considerations

This unit replaces failed or undersized motors in existing fan and blower assemblies where a 56CZ frame C-face mount is required. The jump is worth it when the original motor lacks the 8.6 A full-load rating or the 40 °C ambient-temperature tolerance needed for sustained operation. Open drip-proof enclosure suits clean, dry indoor environments.

Fit And Limits

The motor suits technicians servicing HVAC equipment that demands a 2 7/16 in. shaft and reversible CW/CCW rotation. It is not for buyers who need thermal overload protection, a different voltage, or an enclosed housing for wet or dirty locations. Builders requiring multi-speed control or a smaller frame should look elsewhere.

How it compares

Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.

Price $298.99
Pricier than about 90% of the 1,762 comparable items (median $45.99).

Specifications

Product
Brand nameDAYTON

Questions about this item

What frame size and shaft length does this 56CZ motor need for mounting?

The motor uses a 56CZ frame with a C-Face mount and a shaft length of 2 7/16 in., so the driven equipment must match that face pattern and shaft reach.

How do I wire the split-phase motor for reversible rotation, and what mistake should I avoid?

Connect the 115 V supply to the main and start windings per the nameplate diagram; swapping the start-winding leads reverses rotation, but never energise both windings simultaneously without the centrifugal switch engaged.

When should I plan to replace the bearings on this continuously rated motor?

With continuous duty at 40 °C max ambient and no thermal protection, inspect bearings annually and replace them at the first sign of noise or excess heat to avoid sudden failure.

More in Heating & Cooling Controllers

Similar items