Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.4 TB SAS drive spinning at 10000 RPM with a 12 Gb/s interface and hot-swap tray
The Dell 400-AVCB is a 2.4TB 2.5-inch internal hard drive built for servers and storage arrays needing high capacity with a SAS 12Gb/s interface. It spins at 10000 RPM and ships as a bare drive with a hot-swap tray for quick replacement. This unit suits IT teams expanding Dell PowerEdge or compatible SAS backplanes.
The SAS 12Gb/s link tops out at 12Gb/s, so throughput cannot exceed that ceiling regardless of drive speed. Mechanical latency at 10K RPM remains higher than solid-state alternatives, affecting random I/O response times. Cabling and backplane firmware must support 12Gb/s to reach the rated transfer rate; older 6Gb/s infrastructure will throttle performance.
The single specification that determines suitability is the 2.4TB capacity. Arrays requiring larger individual drives must look elsewhere, while configurations needing smaller increments will waste space and budget. Match the drive count and RAID layout to this exact capacity before ordering.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Model name | 400-AVCB |
| Total capacity | 2 TB |
| Performance | |
| Rotational speed | 10,000 RPM |
| Mean latency | 12Gb/s |
| Ports & slots | |
| Interface type | SAS 12Gb/s |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
Choose the 2.4TB 10000 RPM SAS drive when you need maximum capacity and fast rotational speed in a 2.5" hot-swap bay; select a smaller drive only if your array has strict space or power limits.
The 12Gb/s SAS link moves data at up to 12 gigabits per second between the drive and controller, letting the 10000 RPM platters feed sequential workloads without bottlenecking the bus.
Yes, the drive will negotiate down to 6Gb/s on a 6Gb/s backplane, so peak throughput is limited to the slower link while all other drive characteristics remain unchanged.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?