DELL NEC NP62J OEM Replacement Projector Lamp 200W
A replacement projector lamp module with a 200 W UHP bulb rated for 2,500 hours normal or 3,500 hours economy use
- Power rating200 W
- Lamp lifespan2,500 (Normal) - 3,500 (Economy) Hrs.
- Product typeUHP
- Ready to install with pre-assembled housing
- 200 W UHP lamp delivers 2 500 hours normal life
- Economy mode extends use to 3 500 hours
- Manufactured to ISO 9001 quality standards
- Supplied as a genuine OEM replacement module
Compatible Projector Lamp Module
This replacement lamp module fits NEC projectors using the NP62J designation and includes a pre-assembled Philips UHP 200W bulb inside its housing. It arrives ready to install without separate bulb handling.
Suitable for Standard Brightness Needs
Users who need the rated 2,500 hours in normal mode or 3,500 hours in economy mode will find this lamp matches the original specification. Buyers who require a higher-wattage light source or a different lamp form factor should look at other models.
Simple Housing Swap Installation
The fully assembled housing allows a straightforward swap by opening the projector lamp door and replacing the module. The most common issue is forgetting to reset the lamp-hour counter in the projector menu after installation.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $115.99
- Pricier than about 64% of the 9,513 comparable items (median $99.99).
- Power rating 200 W
- Lower than about 60% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Brand name | NEC |
| Product type | UHP |
| Display | |
| Lamp lifespan | 2,500 (Normal) - 3,500 (Economy) Hrs. |
| Power | |
| Power rating | 200 W |
Questions about this item
Which NEC projector models accept the NP62J lamp module?
The NP62J lamp module fits NEC projectors that list NP09LP or NP62J as the original lamp code. Check your projector manual for that exact part number before ordering.
Does the 200W UHP lamp run on the same ballast as the original NEC lamp?
Yes. The replacement uses a 200W Philips UHP bulb built to the same electrical spec, so it ignites and runs on the projector's existing ballast without modification.
How can I verify the lamp is operating correctly after installation?
Reset the lamp-hour counter in the projector menu, then confirm the image reaches full brightness and the timer starts counting from zero in Normal or Economy mode.
More in Replacement Projector Bulbs
Similar items
Hitachi, Ltd. DT01285 Projector Lamp 245W UHP 2500/4000 Hrs
- 245 W
- 2,500 (Normal) - 4,…
DREAM VISION Dreamweaver 3 OEM Replacement Projector Lamp 250W
- 250 W
- 2,000 Hrs.





