DELL PowerEdge M640 Blade Server 2x Xeon Gold 6230 20C 2.1GHz 512GB DDR4 2x 1.92TB SATA 57810S-K iDRAC9 Ent
- Xeon
- 2.1 GHz
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Half-height blade server with dual 24-core Xeon 8260 CPUs at 2.4 GHz, 512 GB DDR4 ECC memory, two 960 GB SATA SSDs on a PERC S140 controller.
Installed Memory Size 512GB
SSD (Installed) 2 x 960GB SATA SSD
The Dell PowerEdge M640 is a half-height blade server built for dense compute clusters. Two Xeon Platinum 8260 processors deliver 24 cores each at 2.4 GHz with a 3.9 GHz turbo frequency. 512 GB of DDR4 registered ECC memory fills 16 slots. Dual 960 GB SATA SSDs sit behind a PERC S140 controller supporting RAID 0, 1, 5 and 10.
This blade fits organisations running virtualization, private cloud or high-performance computing that can use the installed Broadcom 57810S-K dual-port 10 Gb daughter card. Buyers who need Fibre Channel connectivity or GPU acceleration should look elsewhere because the server only provides a Matrox G200 with 8 MB video memory and no PCIe expansion is mentioned.
The chassis accepts a maximum of two processors in LGA 3647 sockets, so the installed pair of Xeon Platinum 8260 CPUs already reaches the hard ceiling. Any future upgrade would require replacing both processors rather than adding a third.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge M640 |
| Product type | Blade |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 24-Core Processor |
| Processor socket | LGA 3647 |
| Processor speed | 2.4 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 512 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 2 TB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | 2 × 960 GB SATA SSD |
| Disk controller | Dell Perc S140 Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/10 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Ports & slots | |
| Management interface | RJ 45 |
| Size & build | |
| Rack height | Blade |
| Software | |
| Operating system | No |
Other versions of this model
The iDRAC9 Enterprise remote-management interface provides system health, power status and hardware inventory over the network once the blade is seated and powered.
The unit ships with two Xeon Platinum 8260 processors, 512GB DDR4 in 16 slots, two 960GB SATA SSDs, the PERC S140 controller and the 57810S-K 10Gb dual-port daughter card; front bezel, ready rails and an operating system are not included.
The installed 512GB uses 16×32GB DDR4 2933MHz modules filling every slot; reaching 1.5TB would require replacing all modules with higher-capacity DDR4 DIMMs.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?