DELL PowerEdge M640 Blade Server 2x Xeon Platinum 8260 24C 2.4GHz 128GB DDR4 S140 57810S-K iDRAC9 Enterprise
- Xeon
- 2.4 GHz
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Half-height blade server with dual 24-core Xeon 8260 CPUs, 64GB DDR4 ECC memory, dual 960GB SATA SSDs on a PERC H330 controller, and iDRAC9 Enterprise management
Installed Memory Size 64GB
SSD (Installed) 2 x 960GB SATA SSD
The Dell PowerEdge M640 is a half-height blade server built for the PowerEdge MX and M1000e chassis. It carries two Intel Xeon Platinum 8260 processors, each with 24 cores running at 2.4 GHz and a 3.9 GHz turbo. The system includes 64 GB of DDR4 registered ECC memory across 16 slots, with a maximum capacity of 1.5 TB.
The PERC H330 controller supports RAID 0, 1, 5, 10 and 50 over SATA and SAS interfaces. Two 960 GB SATA SSDs are installed in the 2.5-inch bays. The Broadcom 57810S-K daughter card provides dual-port 10 Gb connectivity. The blade form factor means it cannot operate outside a compatible MX or M1000e enclosure.
iDRAC9 Enterprise enables full out-of-band management, firmware updates and virtual console access over the network. The Matrox G200 graphics core provides basic 2D output with 8 MB of video memory. The unit ships without a front bezel, ready rails or an operating system, so those items must be sourced separately for deployment.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge M640 |
| Product type | Blade |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 24-Core Processor |
| Processor socket | LGA 3647 |
| Processor speed | 2.4 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 64 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 2 TB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | 2 × 960 GB SATA SSD |
| Disk controller | Dell Perc H330 Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/10/50 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Ports & slots | |
| Management interface | RJ 45 |
| Size & build | |
| Rack height | Blade |
| Software | |
| Operating system | No |
Other versions of this model
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?