DELL PowerEdge M640 Blade Server 2x Xeon Platinum 8160 24-Core 512GB DDR4 2x 960GB SSD
- Xeon
- 2.1 GHz
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Half-height blade server with dual 20-core Xeon Gold 6230 CPUs, 512GB DDR4, dual 960GB SSDs, PERC H330 RAID, 10Gb dual-port networking and iDRAC9 Enterprise
Installed Memory Size 512GB
SSD (Installed) 2 x 960GB SATA SSD
The Dell PowerEdge M640 is a half-height blade server built for dense compute clusters. Two Intel Xeon Gold 6230 processors deliver 40 total cores at 2.1 GHz base and 3.9 GHz turbo. The unit ships with 512 GB of DDR4 registered ECC memory across 16 slots and a PERC H330 controller managing two 960 GB SATA SSDs. A Broadcom 57810S-K dual-port 10 Gb daughter card handles networking.
The jump makes sense when workloads exceed the core count or memory ceiling of a single-processor blade. Adding the second Gold 6230 raises the ceiling to 40 cores and 512 GB, while the chassis supports up to 56 cores per server and 1.5 TB of DDR4. The PERC H330 enables RAID 0, 1, 5, 10 and 50 for local redundancy. NVMe support in the platform allows faster storage tiers later.
Installation is a matter of inserting the blade into a compatible Dell PowerEdge MX or M1000e enclosure and cabling the fabric modules. iDRAC9 Enterprise provides out-of-band management for firmware updates and remote console access before the OS loads. Common issues include mismatched firmware between blade and chassis, missing fabric licences for the 10 Gb ports, and forgetting that front bezel and ready rails are not included.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge M640 |
| Product type | Blade |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 20-Core Processor |
| Processor socket | LGA 3647 |
| Processor speed | 2.1 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 512 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 2 TB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | 2 × 960 GB SATA SSD |
| Disk controller | Dell Perc H330 Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/10/50 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Ports & slots | |
| Management interface | RJ 45 |
| Size & build | |
| Rack height | Blade |
| Software | |
| Operating system | No |
Other versions of this model
The M640 is designed for Dell PowerEdge MX and M1000e chassis, occupying a single half-height blade slot.
Both LGA 3647 sockets are populated at the factory; the step often missed is applying the correct torque sequence when reseating the heatsinks after any service.
The 960 GB SATA SSDs are rated for enterprise write endurance and the PERC H330 has no battery-backed cache, so plan SSD replacement when SMART media-wear indicators approach threshold and controller replacement if a firmware fault cannot be cleared.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?