We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 2U 8 Bay 2.5" 2x Xeon E5-2620 v3 2.4GHz 6 Core 512GB DDR4 H730 2x 300GB SAS

SKU CH-TX8T-4MPZ1

2U rack server with dual Xeon E5-2620 v3 processors, 512GB DDR4 memory, H730 RAID controller and two 300GB SAS drives

  • ProcessorIntel Xeon
  • Installed RAM512 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count6-Core Processor
  • Dual Xeon E5-2620 v3 CPUs deliver 12 cores at 2.4 GHz with 3.2 GHz Turbo
  • 512 GB DDR4 2133 MHz registered ECC memory across 16 modules
  • PERC H730 1 GB controller supports RAID 0/1/5/6/10/50/60 and pass-through
  • Quad-port X520/I350 card provides 2× 1 GbE and 2× 10 Gb SFP+ connectivity
  • iDRAC 8 Enterprise enables full remote management with dual 750 W platinum power supplies

Dual-socket Xeon 2U rack server

The Dell PowerEdge R730 is a 2U rack-mounted server fitted with two Intel Xeon E5-2620 v3 processors running at 2.40 GHz with six cores each. It ships with 512 GB of DDR4 registered ECC memory across 16 DIMM slots and a Dell PERC H730 1 GB storage controller. Two 300 GB 10K SAS drives and dual 750 W platinum power supplies are installed.

Virtualisation hosts needing dense memory

The 24 memory slots and 1.5 TB maximum capacity suit environments that run many virtual machines or large in-memory databases. The H730 controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Organisations that require only a single processor or less than 24 DIMM slots will find the chassis oversized.

24 DDR4 DIMM slots with 1.5 TB ceiling

The board provides 24 registered ECC DDR4 slots and a 1.5 TB maximum, so the installed 512 GB can be expanded in 32 GB increments up to that limit. Buyers whose workloads demand more than 1.5 TB of system memory must select a different platform.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,733.99
Typical for this category: the median of 17,641 items is $1,910.99.
Installed RAM 512 GB
Higher than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730
Model nameR730
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count6-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.4 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM512 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

What rack depth and mounting hardware are needed to install this 2U server?

The unit is a 2U rack server and ships with Ready Rails for standard four-post racks; verify your rack depth matches the rail specification before mounting.

Will the PERC H730 controller recognise my existing 6 Gb/s SAS drives?

The H730 supports 12 Gb/s SAS and SATA with backward compatibility, so 6 Gb/s SAS drives will be detected and can be configured in RAID 0/1/5/6/10/50/60.

How can I confirm the 512 GB DDR4 memory is running at 2133 MHz after setup?

Check the iDRAC8 Enterprise inventory or the BIOS memory information screen; both report each DIMM speed and total capacity.

More in Rack & Tower Servers

Similar items