We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 2U rack server 2× E5-2620 v3 2.4GHz 6-core 512GB DDR4 H730 8× 1.2TB SAS

SKU CH-SPHQ-Z4ZG2

2U rack server with dual 2.4GHz 6-core Xeon CPUs, 512GB DDR4 ECC memory, H730 RAID controller and eight 1.2TB 10K SAS drives

  • ProcessorIntel Xeon
  • Installed RAM512 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count6-Core Processor
  • Dual Xeon E5-2620 v3 processors deliver 12 cores at 2.4 GHz base clock
  • 512 GB DDR4 registered ECC memory across 16 slots supports virtualisation density
  • PERC H730 1 GB controller enables RAID 0/1/5/6/10/50/60 with battery-backed cache
  • Eight 1.2 TB 10K SAS drives provide high-throughput storage in 2.5-inch bays
  • iDRAC8 Enterprise gives dedicated remote management with virtual console access

Dual-socket Xeon rack server

The Dell PowerEdge R730 is a 2U rack server equipped with two Intel Xeon E5-2620 v3 processors running at 2.40 GHz with 6 cores each. It ships with 512 GB of DDR4 registered ECC memory across 16 DIMM slots and a PERC H730 storage controller with 1 GB cache. Eight 1.2 TB 10K SAS drives and dual 750 W power supplies are installed.

Virtualisation and database hosts.

This configuration suits teams consolidating virtual machines, running databases or hosting VDI workloads that benefit from high core counts and large memory capacity. The quad-port 1 GbE and 10 GbE SFP+ network card supports heavy east-west traffic. Buyers who need GPU acceleration, all-flash tiers or single-thread frequency above 3.2 GHz should look at alternative platforms.

512 GB DDR4 registered ECC memory

The system arrives with 512 GB of DDR4 2133 MHz registered ECC memory populated in 16 of 24 slots, leaving room to scale toward the 1.5 TB maximum. Memory type and rank must match for any expansion, so this installed capacity is the key figure when planning upgrades.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,713.99
Cheaper than about 54% of the 17,641 comparable items (median $1,910.99).
Installed RAM 512 GB
Higher than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730
Model nameR730
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count6-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.4 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM512 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

How loud and hot does the R730 get with both 750 W Platinum PSUs and dual 2.4 GHz Xeons running 24/7?

Dual 750 W Platinum supplies and two 2.4 GHz 6-core Xeons draw significant power under load; expect noticeable fan noise and heat output in a 2U rack space.

Which cabling and modules do I need to use the X520/I350 daughter card's two 10 GbE SFP+ ports?

The card presents two 10 GbE SFP+ cages; you must supply compatible SFP+ transceivers or direct-attach cables for fibre or copper links.

Can the PERC H730 controller manage the eight installed 1.2 TB 10K SAS drives together with older 6 Gb/s SAS disks I might add?

The H730 supports 12 Gb/s SAS/SATA and will negotiate down to 6 Gb/s for older drives, allowing mixed arrays across the 8-bay backplane.

More in Rack & Tower Servers

Similar items