We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 2U rack server 2x Xeon E5-2699 v4 2.2GHz 22-core 256GB DDR4 8x 800GB SSD

SKU CH-HAAH-873KR

A 2U rack server with dual 22-core Xeon processors at 2.2 GHz, 256 GB DDR4 memory and eight 800 GB SATA SSDs on a PERC H730 controller

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Video RAM8 MB
  • Installed SSD8 × 800 GB SATA SSD
  • ChipsetIntel C610
  • Processor core count22-Core Processor
  • Dual 22-core Xeon CPUs deliver 44 threads at 2.2 GHz base with 3.6 GHz turbo
  • 256 GB DDR4 registered ECC memory across 24 slots supports up to 1.5 TB capacity
  • PERC H730 1 GB controller enables RAID 0, 1, 5, 6, 10, 50, 60 plus pass-through
  • Eight 800 GB SATA SSDs provide high-speed storage in hot-swap 2.5-inch bays
  • iDRAC8 Enterprise plus quad-port 1 GbE and 10 GbE networking simplifies remote management

Dual 22-core Xeon server for virtualisation

The PowerEdge R730 is a 2U rack system equipped with two Intel Xeon E5-2699 v4 processors running at 2.2 GHz with a 3.6 GHz turbo frequency. It delivers 44 total cores and 256 GB of DDR4 registered ECC memory across eight 32 GB modules. The Dell PERC H730 controller manages eight 800 GB SATA SSDs with support for RAID levels 0, 1, 5, 6, 10, 50 and 60.

Suits heavy multi-thread workloads

This configuration targets midsize and large enterprises running data warehouses, e-commerce platforms, virtual desktop infrastructure or high-performance computing data nodes. Quad-port networking provides two 1 GbE and two 10 Gb SFP+ connections. Buyers who need more than 1.5 TB of memory or more than two processor sockets should look at a different platform.

24 DIMM slots define the memory ceiling

The server populates eight of 24 available DDR4 slots, leaving room to reach the 1.5 TB maximum capacity with larger modules. LGA 2011-3 sockets are already filled by the two installed CPUs, so processor upgrades are not possible. The 2.5-inch drive bays and PERC H730 controller limit storage expansion to SATA or SAS devices.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $2,509.99
Pricier than about 60% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730
Model nameR730
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count22-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.2 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM256 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSD8 × 800 GB SATA SSD
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

What RAID levels does the H730 controller support?

The PERC H730 1GB controller supports RAID 0, 1, 5, 6, 10, 50 and 60 with its included battery backup.

What are the physical mounting requirements for this 2U server?

Ready Rails are included for standard four-post rack mounting; the chassis occupies 2U of rack height.

How is the iDRAC 8 Enterprise remote management configured initially?

Connect a dedicated management cable, then access the iDRAC web interface via its default IP address to set credentials and network settings.

More in Rack & Tower Servers

Similar items