We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U 12 Bay 3.5" 2x Xeon E5-2620 v3 2.4GHz 768GB DDR4 H730

SKU CH-4B0X-5B5B8

A 2U rack server with twelve 3.5-inch drive bays, dual Xeon E5-2620 v3 processors, 768GB DDR4 memory and a PERC H730 controller

  • ProcessorIntel Xeon
  • Installed RAM768 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count6-Core Processor
  • Dual Xeon E5-2620 v3 CPUs deliver 2.4 GHz base with 3.2 GHz turbo for multi-threaded workloads
  • 768 GB DDR4 2133 MHz ECC memory across 24 slots supports large virtualisation density
  • PERC H730 1 GB controller enables RAID 0/1/5/6/10/50/60 for flexible data protection
  • 12 x 3.5" hot-swap trays accept SAS or SATA drives for high-capacity storage
  • iDRAC 8 Enterprise plus quad-port 1/10 GbE networking simplifies remote management and connectivity

Dell PowerEdge R730xd 2U 12-Bay Server

The Dell PowerEdge R730xd is a 2U rack server equipped with two Intel Xeon E5-2620 v3 processors running at 2.40 GHz with a 3.2 GHz turbo frequency. It includes 768 GB of DDR4 2133 MHz registered ECC memory across 24 slots, supporting up to 1.5 TB total. The system uses a Dell PERC H730 storage controller with 1 GB cache and provides twelve 3.5-inch drive trays for SATA or SAS drives.

Suits dense storage and virtualisation.

This server suits organisations needing high internal storage capacity in a compact 2U form factor for databases, virtual desktop infrastructure or data warehousing. The quad-port network daughter card offers two 1 GbE and two 10 Gb SFP+ connections. Buyers who require GPU acceleration or single-threaded frequency above the 3.2 GHz turbo should consider alternative platforms.

Twelve 3.5-inch trays with H730 RAID controller

The defining specification is the twelve 3.5-inch hot-swap drive trays paired with the PERC H730 controller supporting RAID 0, 1, 5, 6, 10, 50 and 60 modes. This combination determines whether the chassis meets the required drive count and RAID level for the intended storage workload. Redundant 750 W platinum power supplies and iDRAC8 Enterprise remote management are included.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $2,459.99
Pricier than about 59% of the 17,641 comparable items (median $1,910.99).
Installed RAM 768 GB
Higher than about 90% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count6-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.4 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM768 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

What hard drives must I already own to populate the 12 3.5-inch bays?

You need 3.5-inch SAS or SATA hard drives; the twelve trays accept either interface and no drives are included.

Will the dual Xeon E5-2620 v3 processors and C610 chipset work with my existing DDR4-2133 registered ECC modules?

Yes, the 24 DIMM slots support DDR4-2133 registered ECC memory up to 1.5TB total capacity.

How can I confirm the PERC H730 controller is operational after installation?

The controller initialises during POST, appears in the iDRAC8 Enterprise inventory, and shows its 1GB cache status in the RAID configuration utility.

More in Rack & Tower Servers

Similar items