We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U 24 Bay 2.5" 2x Xeon E5-2640 v3 2.6GHz 8C 256GB DDR4 H730 2x 400GB SSD

SKU CH-MACS-ENMJ0

2U rack server with 24 2.5-inch drive bays, dual Xeon E5-2640 v3 8-core CPUs, 256GB DDR4 ECC memory, PERC H730 RAID controller, two 400GB SSDs, quad-port 1/10GbE networking, iDRAC8 Enterprise.

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Video RAM8 MB
  • Installed SSD2 × 400 GB SATA SSD
  • ChipsetIntel C610
  • Processor core count8-Core Processor
  • Dual Xeon E5-2640 v3 processors run at 2.6 GHz with 3.4 GHz turbo
  • 256 GB DDR4 ECC memory across 8 modules supports up to 1.5 TB capacity
  • PERC H730 controller enables RAID 0 1 5 6 10 50 60 with battery backup
  • Two 400 GB enterprise SATA SSDs provide fast boot and cache storage
  • Quad-port network card adds 2× 1 GbE and 2× 10 Gb SFP+ connectivity

Dense 2U server with dual Xeon and 24 bays

The Dell PowerEdge R730xd packs two Intel Xeon E5-2640 v3 processors at 2.6 GHz with 8 cores each into a 2U rack chassis. It ships with 256 GB of DDR4 registered ECC memory across eight 32 GB modules and includes a PERC H730 1 GB controller supporting RAID 0, 1, 5, 6, 10, 50 and 60. Twenty-four 2.5-inch SATA drive bays provide high internal storage density.

Suited for storage-heavy workloads.

Organisations running databases, virtual desktop infrastructure or data-warehouse nodes will benefit from the drive count and memory capacity. The dual 10 Gb SFP+ and dual 1 GbE ports on the Intel X520/I350 daughter card give strong network throughput. Buyers who need GPU acceleration or PCIe add-in cards beyond the available slots should consider a different platform.

24-bay 2.5-inch SATA backplane decides fit

The chassis accepts up to twenty-four 2.5-inch SATA SSDs or HDDs, so the right part hinges on whether the deployment needs that many hot-swap drives in a 2U space. The PERC H730 controller manages the array with 1 GB cache and battery backup. If the project requires fewer bays or a different drive interface, another server model will match better.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,023.99
Cheaper than about 73% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count8-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.6 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM256 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSD2 × 400 GB SATA SSD
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

Do I need to supply my own rails and bezel to install this 2U rack server?

Ready Rails and a front bezel are included with the PowerEdge R730xd so no extra mounting kit is required.

Will the PERC H730 controller recognise the existing 2.5" SATA drives I already own?

The H730 supports both SAS and SATA on the 24-bay backplane, so your current 2.5" SATA drives will be detected and can be configured in RAID 0, 1, 5, 6, 10, 50 or 60.

How can I confirm the two Xeon E5-2640 v3 processors are running at their 3.4 GHz turbo speed after setup?

Check the CPU frequency in the iDRAC 8 Enterprise dashboard or the system BIOS; it will show 3.4 GHz when the 8-core processors hit maximum turbo.

More in Rack & Tower Servers

Similar items