We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U 24 Bay 2x Xeon E5-2620 v3 2.4GHz 256GB DDR4 24x 600GB SAS H730

SKU CH-8KPJ-S4RPV

A 2U rack server with twenty-four 2.5-inch drive bays, dual Xeon E5-2620 v3 processors at 2.4 GHz, 256 GB DDR4 memory and a PERC H730 RAID controller

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count6-Core Processor
  • Dual Xeon E5-2620 v3 2.4GHz 6-core CPUs deliver strong multi-thread performance
  • 256GB DDR4 2133MHz registered ECC memory supports large virtualised workloads
  • PERC H730 1GB controller enables RAID 0/1/5/6/10/50/60 with battery-backed cache
  • 24-bay 2.5" chassis holds 600GB 10K SAS drives for high-capacity storage density
  • iDRAC8 Enterprise plus X520/I350 quad-port 1GbE/10GbE SFP+ provides remote management and fast networking

Dense 2U Storage Server

The Dell PowerEdge R730xd packs 24 front-accessible 2.5-inch bays into a 2U rack chassis, driven by two Xeon E5-2620 v3 processors at 2.4 GHz with 6 cores each and 256 GB of DDR4 ECC memory. It targets organisations that need high drive counts for databases, virtual desktop infrastructure or HPC data nodes in limited rack space.

SAS 12 Gb/s Controller Limits

The PERC H730 controller operates at 12 Gb/s over SAS and SATA, supporting RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Throughput is bounded by the 12 Gb/s link and the 10 K rpm mechanical drives; the 1 GB cache helps burst writes but sustained performance follows spindle speed.

Rail Install With Cable Discipline

Ready Rails slide the 2U unit into standard racks, yet the 24 drive carriers and quad-port network daughter card leave little room for cable routing at the rear. Installers should dress power and SFP+ cables before sliding the server home, and verify iDRAC 8 Enterprise network settings before closing the rack door.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,512.99
Cheaper than about 59% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count6-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.4 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM256 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

How many 2.5-inch drive bays does the R730xd provide and what capacity SAS drives are installed?

The chassis has 24 front bays, each populated with a 600 GB 10 K SAS drive.

What memory speed will the 256 GB DDR4 actually run at with the fitted Xeon E5-2620 v3 processors?

The CPUs support DDR4-2133, so the 8×32 GB modules operate at 2133 MHz.

What RAID levels can the PERC H730 controller handle and what is its SAS link speed?

The H730 supports RAID 0, 1, 5, 6, 10, 50 and 60 over 12 Gb/s SAS connections.

More in Rack & Tower Servers

Similar items