We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U rack server 2× Xeon E5-2640 v3 2.6GHz 8-core 64GB DDR4 24× 400GB SSD H730

SKU CH-CH9G-6WQD5

A 2U rack server with dual 8-core Xeon processors, 64GB DDR4 memory and 24 SATA SSDs on a PERC H730 RAID controller

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Video RAM8 MB
  • Installed SSD24 × 400 GB SATA SSD
  • ChipsetIntel C610
  • Processor core count8-Core Processor
  • Dual Xeon E5-2640 v3 2.6 GHz 8-core CPUs deliver strong multi-threaded performance
  • 64 GB DDR4 2133 MHz registered ECC memory supports large virtualised workloads
  • 24 × 400 GB SATA SSDs on PERC H730 provide high-density flash storage
  • X520/I350 quad-port card adds 2 × 10 Gb SFP+ and 2 × 1 GbE connectivity
  • iDRAC8 Enterprise enables remote management and monitoring from anywhere

Dual Xeon E5-2640 v3 2U server

This 2U rack system carries two eight-core Intel Xeon E5-2640 v3 processors at 2.6 GHz with 3.4 GHz turbo. It ships with 64 GB of DDR4 registered ECC memory across four 16 GB modules. Twenty-four 400 GB SATA SSDs are installed behind a Dell PERC H730 1 GB RAID controller supporting RAID 0, 1, 5, 6, 10, 50 and 60. Dual 750 W platinum power supplies and iDRAC 8 Enterprise remote management are included.

High-density storage for virtualisation

The 24-bay 2.5-inch chassis suits workloads that need many drives in a compact rack footprint, such as VDI, data warehousing or HPC data nodes. Quad-port networking with two 1 GbE and two 10 Gb SFP+ links handles moderate east-west traffic. Buyers who need more than 24 drive bays, larger individual SSDs, or GPU compute density should evaluate other platforms.

PERC H730 RAID controller with 1 GB cache

The storage controller determines which RAID levels are available and whether the battery-backed cache can protect in-flight writes during power loss. This unit provides hardware RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Confirm that the supported RAID set matches the application's resilience requirements before purchase.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $2,113.99
Typical for this category: the median of 17,641 items is $1,910.99.
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count8-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.6 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSD24 × 400 GB SATA SSD
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

What type of rack does the 2U PowerEdge R730xd fit into?

The server includes Ready Rails and a bezel for mounting in a standard 2U rack opening.

Can the PERC H730 controller use the 24 installed 400GB SATA SSDs together with older SATA drives I might add?

The H730 supports SATA and SAS drives; the 24 bays already hold 400GB SATA SSDs, and any additional SATA drives will connect to the same backplane.

How do I confirm the two Xeon E5-2640 v3 processors and 64GB of DDR4 are recognised after power-on?

During POST the BIOS lists both 8-core CPUs at 2.6GHz and shows 64GB of registered ECC DDR4; iDRAC8 Enterprise also reports the same inventory.

More in Rack & Tower Servers

Similar items