We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dell PowerEdge R730xd 2U rack server front view with bezel and drive bays

DELL

DELL PowerEdge R730xd 2U rack server 2x Xeon E5-2620 v3 2.4GHz 64GB DDR4 2x 400GB SSD H730

SKU CH-Q80F-PZDCB

2U rack server with dual 6-core Xeon processors at 2.4 GHz, 64 GB DDR4 ECC memory, PERC H730 RAID controller, two 400 GB SATA SSDs, quad-port 1/10 GbE networking, iDRAC8 Enterprise.

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Video RAM8 MB
  • Installed SSD2 × 400 GB SATA SSD
  • ChipsetIntel C610
  • Processor core count6-Core Processor
  • Dual Xeon E5-2620 v3 CPUs deliver 12 cores at 2.4 GHz base with 3.2 GHz turbo
  • 64 GB DDR4 registered ECC memory installed across four slots supports up to 1.5 TB total
  • PERC H730 1 GB controller enables RAID 0, 1, 5, 6, 10, 50, 60 plus pass-through
  • Two 400 GB enterprise SATA SSDs provide fast boot and caching in hot-swap bays
  • Quad-port X520/I350 card adds two 1 GbE and two 10 Gb SFP+ links

Dual-socket Xeon E5-2620 v3 server

The Dell PowerEdge R730xd is a 2U rack server built around two Intel Xeon E5-2620 v3 processors, each running at 2.4 GHz with six cores and a 3.2 GHz turbo frequency. It targets midsize to large enterprises that need dense storage and compute for virtualisation, databases or high-performance computing nodes.

24-bay 2.5" chassis with PERC H730 RAID

The chassis holds 24 hot-swap 2.5-inch SATA drives, providing extensive internal capacity for mixed workloads. Two 400 GB SATA SSDs are installed and managed by the PERC H730 1 GB controller, which supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through. Memory scales to 1.5 TB across 24 DDR4 slots, with 64 GB of registered ECC DDR4-2133 populated in four 16 GB modules.

Quad-port 1/10 GbE networking and iDRAC8 Enterprise

A quad-port network daughter card delivers two 1 GbE and two 10 Gb SFP+ links for flexible fabric connectivity. Dual 750 W platinum hot-swap power supplies provide redundancy, while iDRAC8 Enterprise enables full out-of-band management. Ready rails and a front bezel are included for straightforward rack mounting.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $653.99
Cheaper than about 89% of the 17,641 comparable items (median $1,910.99).
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count6-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.4 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSD2 × 400 GB SATA SSD
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

Will the 2.4 GHz Xeon E5-2620 v3 processors and DDR4 2133 MHz memory work with existing LGA 2011-3 components I already own?

The server uses two LGA 2011-3 sockets and 24 DDR4 slots running at 2133 MHz, so compatible processors and registered ECC modules can be added up to the 1.5 TB maximum.

How can I verify the PERC H730 controller and the 400 GB SSDs are operating correctly after installation?

Use the iDRAC 8 Enterprise interface to check controller firmware, RAID status, and drive health; the H730 battery-backed cache and the SSD SMART data will confirm normal operation.

Which items ship with the R730xd and which must be sourced separately?

The unit includes two Xeon E5-2620 v3 CPUs, 64 GB DDR4 (four 16 GB modules), two 400 GB SATA SSDs, H730 controller, X520/I350 quad-port NIC, iDRAC 8 Enterprise, two 750 W PSUs, rails and bezel; additional drives or memory are not included.

More in Rack & Tower Servers

Similar items