We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U rack server 2x Xeon E5-2680 v4 2.4GHz 14-core 768GB DDR4 24x 600GB SAS

SKU CH-F6DX-F9275

2U rack server with dual 14-core Xeon processors at 2.4 GHz, 768 GB DDR4 memory, H730 RAID controller and 24 SAS drives

  • ProcessorIntel Xeon
  • Installed RAM768 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count14-Core Processor
  • Dual 14-core Xeon E5-2680 v4 at 2.4GHz base and 3.3GHz turbo for heavy multi-threaded workloads
  • 768GB DDR4 2400MHz registered ECC memory across 24 slots with 1.5TB maximum capacity
  • PERC H730 1GB controller supporting RAID 0/1/5/6/10/50/60 and pass-through modes
  • 24 front-access 2.5-inch 600GB 10K SAS drives delivering high IOPS density in 2U
  • Quad-port X520/I350 network card with dual 1GbE and dual 10Gb SFP+ plus iDRAC8 Enterprise remote management

2U 24-bay rack server

The Dell PowerEdge R730xd is a 2U rack server populated with two 14-core Xeon processors running at 2.4GHz and 768GB of DDR4 memory. Twenty-four 600GB 10K SAS drives connect through a PERC H730 controller with 1GB cache. Dual 750W platinum power supplies, quad-port 1GbE and 10Gb SFP+ networking and iDRAC8 Enterprise complete the platform.

Suits dense storage workloads.

This configuration targets workloads that benefit from high drive counts and large memory capacity such as databases, virtual desktop infrastructure and data-warehouse nodes. The SAS drives and RAID controller favour capacity and redundancy over raw flash latency. Buyers who require GPU acceleration, all-flash storage or single-thread optimisation should evaluate other platforms.

24 x 2.5-inch SAS drive bays

The chassis provides twenty-four hot-swap 2.5-inch bays wired to the H730 controller, defining the maximum number of spindles available without expansion shelves. If the deployment needs more than twenty-four drives or a different drive form factor, this server cannot accommodate it.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $3,245.99
Pricier than about 67% of the 17,641 comparable items (median $1,910.99).
Installed RAM 768 GB
Higher than about 90% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count14-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.4 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM768 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

Does this server include the rack rails needed for installation, or must they be purchased separately?

Ready Rails are included with the server, so no separate rail kit is required for standard rack mounting.

Will the PERC H730 controller recognise and manage older SAS or SATA drives I might move from another system?

The PERC H730 supports both SAS and SATA drives and offers pass-through mode, allowing it to manage existing 12 Gb/s or 6 Gb/s drives.

How can I verify the dual Xeon E5-2680 v4 processors and 768 GB of DDR4 are all detected after power-on?

During POST the BIOS will list two 14-core CPUs at 2.4 GHz and show 768 GB across 24 DIMM slots; iDRAC 8 Enterprise then confirms the same inventory remotely.

More in Rack & Tower Servers

Similar items