We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U Rack Server 2x Xeon E5-2680 v4 2.4GHz 14 Core 64GB DDR4 12x 8TB H730

SKU CH-CYZ7-8ZMKH

A 2U rack server with dual 14-core Xeon processors at 2.4 GHz, 64 GB DDR4, a PERC H730 controller and twelve 8 TB SATA drives

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count14-Core Processor
  • Dual Xeon 14-core CPUs at 2.4 GHz base with 3.3 GHz turbo for heavy compute
  • 64 GB DDR4 2400 MHz ECC memory across 4 modules supports large workloads
  • PERC H730 1 GB controller enables RAID 0/1/5/6/10/50/60 and pass-through
  • Twelve 8 TB 7.2K SATA drives provide high-capacity 3.5-inch storage
  • X520/I350 quad-port card adds 2x 1 GbE and 2x 10 Gb SFP+ networking

Dual 14-Core Xeon Server

The Dell PowerEdge R730xd is a 2U rack server built for data-intensive workloads such as databases, virtual desktop infrastructure and high-performance computing nodes. Dual Intel Xeon E5-2680 v4 processors run at 2.4 GHz with a 3.3 GHz turbo frequency, providing 28 cores in total. Sixty-four gigabytes of DDR4 registered ECC memory is installed across four 16 GB modules.

Hot-Swap Drive and Rail Installation

Twelve 3.5-inch drive bays support hot-swap SATA drives; the twelve 8 TB enterprise disks are already fitted and managed by a PERC H730 controller with 1 GB cache. The controller handles RAID levels 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Ready Rails and a front bezel are included for standard rack mounting; verify rail depth against your cabinet before fitting.

Memory, Power and Network Compatibility

The system has 24 DDR4 slots and a maximum memory capacity of 1.5 TB, so additional registered ECC modules can be added later. Two 750 W platinum hot-swap power supplies provide redundancy; confirm your rack PDU connectors match the supply inputs. A quad-port network daughter card supplies two 1 GbE and two 10 Gb SFP+ links; ensure your switch has compatible SFP+ transceivers.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $2,982.99
Pricier than about 65% of the 17,641 comparable items (median $1,910.99).
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count14-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.4 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

How can I verify the PERC H730 controller is managing all 12 drive bays correctly after setup?

Open the PERC H730 BIOS utility during boot and confirm all 12 bays show as online with the desired RAID level; iDRAC 8 Enterprise also displays drive health and controller status remotely.

Which components ship inside the chassis and what must I source separately?

The unit includes two Xeon E5-2680 v4 processors, 64 GB DDR4 in four 16 GB modules, the H730 1 GB controller, twelve 8 TB 3.5" SATA drives, X520/I350 quad-port NIC, two 750 W PSUs, bezel and rails; add OS licences, SFP+ transceivers and any extra memory up to 24 slots.

Which memory configuration should I choose if I need room to reach the 1.5 TB maximum later?

The current 64 GB uses only four of the 24 DDR4 slots; populate remaining slots with registered ECC DDR4 2400 MHz modules in matched sets to scale toward the 1.5 TB limit.

More in Rack & Tower Servers

Similar items