DELL PowerEdge R730XD 2U rack server 2x Xeon E5-2630v3 2.4GHz 64GB DDR4 3x 2TB SAS H330
- 2U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2U rack server with 10-core Xeon at 2.3 GHz, 64 GB DDR4, three 600 GB 15K SAS drives and H330 RAID controller
The Dell PowerEdge R730XD is a 2U rack server built for high-density storage. It uses a single Intel Xeon E5-2650 v3 processor with 10 cores at 2.3 GHz and includes 64 GB of DDR4 memory. Three 600 GB 15K SAS drives and a PERC H330 RAID controller are installed.
This server suits buyers who need 12 hot-plug 3.5-inch drive bays in a compact 2U form factor. The H330 controller supports RAID 0, 1, 5, 10, 50 and 60 for local redundancy. Organisations requiring more than one processor or memory beyond 64 GB should look at a different configuration.
The system ships with one CPU installed and a maximum of two supported. Memory speed runs up to 2400 MT/s depending on the processor capability. The single-socket layout caps memory capacity at 64 GB and leaves the second socket empty for future upgrade.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge |
| Model name | PowerEdge R730XD |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 64 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 64 GB |
| Memory slot count | 24 |
| Storage | |
| Installed SSD | No |
| Disk controller | Dell Perc H330 Controller |
| Drive interface | SAS |
| Supported RAID levels | RAID 0/1/5/10/50/60 |
| Maximum storage | 52 TB |
| Optical drive | DVD ROM |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 4 x Ports |
| Expansion card slots | Up to 7 x PCIe 3.0 plus dedicated PERC slot |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 2U |
| Product weight | 70 lb (31.8 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iDRAC8 with Lifecycle Controller, iDRAC8 Express (default), iDRAC8 Enterprise (upgrade) 8 GB vFlash media (upgrade), 16 GB vFlash media (upgrade) |
Other versions of this model
The chassis holds up to 12 hot-plug 3.5-inch bays; three ship populated with 600 GB 15 K SAS drives and the remaining bays are open for expansion.
Populate the 12 slots belonging to processor 1 first, following the channel sequence shown on the air-shroud label, before adding any modules to the second processor's slots.
Replace the failed 3.5-inch SAS drive, let the H330 rebuild the array, then verify the redundant 750 W power supplies are both showing green status.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?