We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R740 2U 8 Bay 2x Xeon Gold 5118 512GB DDR4 H730P 8x 2.4TB

SKU CH-J5BF-V1WK8

A 2U rack server with dual 12-core Xeon processors at 2.3 GHz, 512 GB DDR4 ECC memory, H730P RAID controller, eight 2.4 TB SAS drives, dual 10 Gb SFP+ and dual 1 GbE ports, iDRAC9 Enterprise.

  • ProcessorIntel Xeon
  • Installed RAM512 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C620
  • Processor core count12-Core Processor
  • Dual Xeon Gold 5118 CPUs deliver 24 cores at 2.3 GHz base with 3.2 GHz turbo
  • 512 GB DDR4 ECC memory across 16 modules supports demanding workloads
  • PERC H730P controller enables RAID 0, 1, 5, 6, 10, 50, 60 with 2 GB cache
  • Eight 2.4 TB 10K SAS drives provide high-capacity 12 Gb/s storage
  • Quad-port networking adds 2× 10 Gb SFP+ and 2× 1 GbE for flexible connectivity

Dell PowerEdge R740 2U Server

The Dell PowerEdge R740 is a 2U rack-mount server system designed for data-centre workloads that demand high core counts and large memory capacity. It ships with two Intel Xeon Gold 5118 processors, each running at 2.3 GHz with 12 cores, and 512 GB of DDR4 2400 MHz registered ECC memory across 16 modules. The platform uses the Intel C620 chipset and supports up to 3 TB of memory across 24 slots.

Suited for virtualisation and database clusters

This configuration suits organisations running virtualisation hosts, database clusters or compute-heavy applications that benefit from 24 total cores and half a terabyte of RAM. The PERC H730P controller with 2 GB cache provides hardware RAID 0, 1, 5, 6, 10, 50 and 60 for the eight installed 2.4 TB 10K SAS drives. Buyers needing more than two processors or storage interfaces beyond SAS and SATA should evaluate other platforms.

Eight 2.4 TB 10K SAS drives included

The single specification that decides fit is the storage subsystem: eight 2.5-inch 2.4 TB 10 000 RPM SAS hard drives are pre-installed behind the PERC H730P controller. This delivers high-capacity, high-throughput rotational storage for workloads that rely on traditional SAS arrays. If the deployment requires solid-state media or a different drive count, the chassis and controller do not match that requirement.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $4,219.99
Pricier than about 73% of the 17,641 comparable items (median $1,910.99).
Installed RAM 512 GB
Higher than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R740
Model nameR740
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count12-Core Processor
Processor socketLGA 3647
ChipsetIntel C620
Processor speed2.3 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM512 GB
Type of memoryDDR4
Maximum RAM capacity3 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730P 2 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slotsRiser options with up to 8 PCIe Gen 3 slots, maximum of 4 × 16 slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

Will the 2.5-inch SAS drives in this R740 share a backplane with my existing 3.5-inch SATA disks?

The R740 uses 2.5-inch drive bays with a SAS backplane; 3.5-inch SATA disks cannot be installed in the same chassis without a different backplane and carrier kit.

How can I verify the PERC H730P controller sees all eight 2.4TB drives after first boot?

Open the H730P BIOS utility (Ctrl+R) or iDRAC9 storage view; all eight drives should appear as Ready with 2.4TB capacity each.

Does the shipment include SFP+ transceivers for the X520 10GbE ports?

The system includes the X520/I350 daughter card, bezel and rails; SFP+ transceivers and fibre cables are not supplied and must be purchased separately.

More in Rack & Tower Servers

Similar items