We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R740 2U Rack Server 2x Xeon Gold 5118 2.3GHz 12-Core 64GB DDR4 H730P 2x 400GB SSD

SKU CH-82RC-VQH5T

Dual 12-core Xeon Gold 5118 processors at 2.3 GHz with 64 GB DDR4, PERC H730P RAID and two 400 GB SSDs in a 2U rack chassis

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Video RAM8 MB
  • Installed SSD2 × 400 GB SATA SSD
  • ChipsetIntel C620
  • Processor core count12-Core Processor
  • Dual Xeon Gold 5118 processors deliver 24 cores at 2.3 GHz base
  • 64 GB DDR4 ECC memory supports up to 3 TB capacity
  • PERC H730P controller enables RAID 0, 1, 5, 6, 10, 50, 60
  • Two 400 GB SATA SSDs provide fast boot and application storage
  • iDRAC9 Enterprise gives full remote management with redundant 750 W PSUs

Dual-socket 2U rack server

The Dell PowerEdge R740 is a 2U rack-mount server built around two Intel Xeon Gold 5118 processors, each running at 2.3 GHz with 12 cores. It ships with 64 GB of DDR4 registered ECC memory across four 16 GB modules. The platform targets virtualisation hosts, database nodes and compute-intensive workloads that benefit from 24 total cores and large memory capacity.

Hot-swap bays and redundant power

Eight 2.5-inch drive bays support hot-swap SATA and SAS drives through a PERC H730P controller with 2 GB cache and battery-backed write cache. Two 400 GB SATA SSDs are installed. Dual 750 W platinum power supplies provide full redundancy. A quad-port network daughter card adds two 1 GbE and two 10 Gb SFP+ connections. iDRAC9 Enterprise enables remote management. Ready Rails and a front bezel are included for rack installation.

Verify rack depth and memory expansion

Confirm the rack enclosure can accommodate a 2U chassis with sliding rails and that power distribution units deliver sufficient 750 W redundant feeds. The system has 24 DDR4 slots with a 3 TB maximum; plan additional registered ECC modules if workloads exceed the factory 64 GB. Ensure switch ports support SFP+ transceivers for the 10 Gb links and that the PERC H730P RAID level matches your redundancy requirements.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $893.99
Cheaper than about 78% of the 17,641 comparable items (median $1,910.99).
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R740
Model nameR740
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count12-Core Processor
Processor socketLGA 3647
ChipsetIntel C620
Processor speed2.3 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity3 TB
Memory slot count24
Storage
Installed SSD2 × 400 GB SATA SSD
Disk controllerDell Perc H730P 2 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slotsRiser options with up to 8 PCIe Gen 3 slots, maximum of 4 × 16 slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

What RAID levels does the PERC H730P controller support?

The PERC H730P supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode for direct drive access.

What rack space and rails are required to mount this 2U server?

The server occupies 2U of rack height and ships with ready rails for standard four-post rack installation.

How do I access the iDRAC9 Enterprise interface for initial setup?

Connect a management cable to the dedicated iDRAC port, then browse to the default IP address shown on the front LCD panel to configure network settings.

More in Rack & Tower Servers

Similar items