We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tower server chassis, matte black finish, front bezel, eight 3.5-inch drive bays, redundant power supplies visible at rear

DELL

DELL PowerEdge T430 5U rack server 2× Xeon E5-2620 v4 2.1GHz 8-core 32GB DDR4 H730 8× 3.5″ trays 2× 750W PSU

SKU CH-JF37-9V2FP

5U rack server with dual Xeon E5-2620 v4 8-core CPUs, 32GB DDR4, PERC H730 RAID controller, eight 3.5″ drive trays and redundant 750W power supplies

  • ProcessorIntel Xeon
  • Installed RAM32 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count8-Core Processor

Installed Memory Size 32GB

HDD None

  • Two Xeon E5-2620 v4 processors provide 8 cores each at 2.1 GHz base with 3.0 GHz turbo
  • 32 GB DDR4 2133 MHz registered ECC memory installed across 12 slots, expandable to 384 GB
  • PERC H730 controller with 1 GB cache supports RAID 0, 1, 5, 6, 10, 50, 60 for SATA and SAS drives
  • Eight 3.5″ hot-swap drive trays and dual 750 W platinum power supplies for internal capacity and redundancy
  • iDRAC 8 Express remote management plus dual-port 1 GbE LOM for out-of-band and network access

Dual Xeon E5-2620 v4 tower server

The Dell PowerEdge T430 is a 5U rack server equipped with two Intel Xeon E5-2620 v4 processors running at 2.1 GHz with eight cores each. It ships with 32 GB of DDR4 registered ECC memory and a PERC H730 storage controller with 1 GB cache. Eight 3.5-inch drive trays support SATA and SAS drives, while dual 750 W platinum power supplies provide redundancy.

Suits small-office and branch workloads

This configuration fits file, print, mail and web serving roles where twin-socket compute and internal storage bays are required. iDRAC 8 Express enables remote management for lights-out sites. Builders who need more than twelve memory slots, more than eight 3.5-inch bays, or integrated 10 GbE networking should evaluate other platforms.

H730 controller with eight 3.5-inch bays

The PERC H730 RAID controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode, backed by a battery. With eight hot-swap trays and support for both SATA and SAS drives, the storage subsystem determines how much local capacity and redundancy the server can deliver.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $547.99
Cheaper than about 92% of the 17,641 comparable items (median $1,910.99).
Installed RAM 32 GB
Lower than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge T430
Model nameT430
Processor
ProcessorIntel Xeon
Processor core count8-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.1 GHz
Installed CPUs0
Max supported CPUs2
Memory
Installed RAM32 GB
Type of memoryDDR4
Maximum RAM capacity384 GB
Memory slot count12
Storage
Installed SSDNo
Installed storageNone
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Optical drive0
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerIntegrated Dell Broadcom 5720 Dual Port 1GbE LOM
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height5U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

What hard drives or SSDs must I provide to use the eight 3.5″ trays and the PERC H730 controller?

You need 3.5″ SAS or SATA drives; the H730 supports RAID 0, 1, 5, 6, 10, 50 and 60 and pass-through mode with its 1 GB cache.

Can I keep my existing DDR4 2133 MHz registered ECC modules and add them to the twelve memory slots?

Yes, the board has twelve DDR4 slots and a 384 GB maximum, so additional 2133 MHz registered ECC DIMMs will work alongside the four 8 GB modules already installed.

How do I confirm the iDRAC8 Express remote management is reachable after first power-on?

Connect the management port, note the DHCP address shown on the front LCD, then browse to that IP; the login prompt confirms iDRAC8 Express is active.

More in Rack & Tower Servers

Similar items