We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge T430 5U Server 2x Xeon E5-2650 v4 2.2GHz 32GB DDR4 H730 8x 3.5" Trays 2x 750W PSUs Bezel

SKU CH-1QS5-356WY

5U tower server with dual 12-core Xeon 2.2 GHz CPUs, 32 GB DDR4 ECC memory, PERC H730 RAID controller, eight 3.5-inch drive trays and redundant 750 W power supplies

  • ProcessorIntel Xeon
  • Installed RAM32 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count12-Core Processor
  • Dual 12-core Xeon E5-2650 v4 CPUs at 2.2 GHz base and 2.9 GHz turbo
  • 32 GB DDR4 ECC memory expandable to 384 GB across 12 slots
  • PERC H730 RAID controller supports RAID 0, 1, 5, 6, 10, 50, 60
  • Eight 3.5-inch SAS/SATA drive trays with hot-swap backplane
  • Redundant 750 W platinum power supplies plus iDRAC8 Express remote management

Tower server for office workloads

The Dell PowerEdge T430 is a 5U tower server built for small offices and remote sites. It arrives with two Xeon E5-2650 v4 processors running at 2.2 GHz with 2.9 GHz turbo. The system includes 32 GB of DDR4 ECC memory across four modules. Dual 750 W platinum power supplies provide redundancy.

Suits single-server deployments without drives

This configuration targets workgroups that need file, print, mail or web serving on one box. The chassis holds eight 3.5-inch SAS or SATA trays but ships with no drives installed. Buyers who want more storage bays or a rack-mount form factor should look at something else.

PERC H730 controller defines RAID options

The Dell PERC H730 1 GB mini controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. It connects to the eight drive trays over 12 Gb/s SAS and SATA links. If your workload needs a different RAID feature set, this controller choice may not match.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $637.99
Cheaper than about 90% of the 17,641 comparable items (median $1,910.99).
Installed RAM 32 GB
Lower than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge T430
Model nameT430
Processor
ProcessorIntel Xeon
Processor core count12-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.9 GHz
Installed CPUs0
Max supported CPUs2
Memory
Installed RAM32 GB
Type of memoryDDR4
Maximum RAM capacity384 GB
Memory slot count12
Storage
Installed SSDNo
Installed storageNone
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Optical drive0
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerIntegrated Dell Broadcom 5720 Dual Port 1GbE LOM
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height5U
Software
Operating systemNo

Questions about this item

How can I verify the PERC H730 controller and both 750W power supplies are detected after first boot?

Open the iDRAC 8 Express web interface or press F2 at the POST screen to enter System Setup; both the storage controller and each redundant power supply will appear with status "OK" if they are functioning correctly.

Which components ship inside the chassis and which must I purchase separately?

The server arrives with two Xeon E5-2650 v4 processors, 32GB DDR4 in four 8GB modules, the PERC H730 1GB controller with battery, eight 3.5" drive trays, dual 750W platinum PSUs, the Broadcom 5720 dual 1GbE LOM, iDRAC 8 Express and the front bezel; hard drives and any additional memory are not included.

Should I choose the base 32GB configuration or add modules up to the 384GB maximum for virtualization workloads?

The system has twelve DDR4 slots and supports up to 384GB; start with the installed 32GB if you run light workloads, then add registered ECC modules in matched pairs as VM density grows.

More in Rack & Tower Servers

Similar items