We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray epoxy adhesive pail with two-part resin and hardener containers

DEVCON

DEVCON 11350 Epoxy Adhesive Gray Pail 2:1 Mix Ratio

SKU CH-Z7CG-MGAM2

Two-part epoxy adhesive in a pail bonds metal with 15-minute working time and abrasion-resistant, chemical-resistant gray finish

  • Product typeCaulks
  • Fast-curing bond ready in 15 minutes
  • Abrasion and chemical resistant for durable repairs
  • Impact resistant with superior wear protection
  • Low odor, water-resistant formula for interior and exterior use
  • Marine grade epoxy bonds metal with under 20 g/L VOC

Industrial-Grade Epoxy for Metal Bonding

DEVCON 11350 is a two-part epoxy adhesive formulated for structural bonding of metal surfaces. The gray adhesive comes in a pail containing both resin and hardener components mixed at a 2:1 ratio. It is designed for interior and exterior applications where abrasion resistance, chemical resistance, and impact strength are required. Marine-grade certification and low odor make it suitable for demanding environments.

Fast-Curing Formula With Low VOC Profile

The adhesive offers a working time of 15 minutes before cure begins, allowing adequate positioning of parts. VOC content is less than 20 g/L by weight and zero percent by percentage, meeting strict environmental standards. Coverage reaches 53 sq in per pound of mixed material. Water-resistant properties and superior wear resistance ensure durability in normal service conditions without excessive fumes.

Sustained Load Performance in Harsh Conditions

Under continuous stress, the cured epoxy maintains structural integrity through superior wear and abrasion resistance. Chemical resistance protects bonds from degradation when exposed to solvents or fluids over time. Impact resistance prevents failure from vibration or sudden loads. The adhesive is not suited for buyers needing flexible bonds, gap-filling beyond thin joints, or non-metal substrates without testing.

How it compares

Measured against everything we stock in Caulking & Sealing Supplies, at today’s prices. Recalculated every night.

Price $399.99
Pricier than about 93% of the 631 comparable items (median $16.99).

Specifications

Product
Brand nameDEVCON
Product typeCaulks

Questions about this item

How do I mix the resin and hardener in the correct 2:1 ratio and what step is often missed?

Measure two parts resin to one part hardener by volume, then stir thoroughly for the full 15 minute working time; the step most often missed is scraping the container sides and bottom to incorporate all material.

Will the cured adhesive need recoating or replacement in high-wear areas?

The cured gray epoxy is abrasion resistant, impact resistant and chemical resistant, so it typically does not require recoating or replacement under normal service conditions.

At what point does the 15 minute working time limit application on large projects?

You have 15 minutes after mixing before the epoxy begins to set, so only mix the quantity you can apply and tool within that window.

More in Caulking & Sealing Supplies

Similar items