We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray metal VGA switch box with two input ports and one output port

Dtech Electronic Technology

Dtech Electronic Technology DT-7032 2-in-1-out VGA video switch 1920x1440 500MHz

SKU CH-MW1E-CT8R2

A manual VGA switch with two inputs and one output supporting 1920x1440 resolution at 500MHz bandwidth

  • Port count2
  • Input ports2
  • Output ports1
  • Connector typeStandard
  • Maximum supported resolutions1920 × 1440
  • Bandwidth rating500 MHz
  • Share one monitor between two PCs with a simple button press
  • Drive a single display at up to 1920x1440 resolution
  • 500 MHz bandwidth keeps video sharp and stable
  • Metal enclosure with rubber feet protects surfaces
  • Plug-and-play operation requires no software or drivers

Two-computer VGA switch

The DT-7032 lets two computers share one VGA monitor or lets one computer alternate between two VGA monitors. It is aimed at users who need a simple manual toggle for presentations, classrooms or control-room setups. Only one display is active at a time.

Metal enclosure with push-button

A grey metal housing with rubber feet protects desktop surfaces while the front-panel button provides instant switching. Two VGA female inputs and one VGA female output use standard screw-on connectors, so no adapters are required. The unit is powered entirely by the video signal, so there is no external supply to carry.

500 MHz bandwidth ceiling

The 500 MHz bandwidth supports resolutions up to 1920x1440, which covers typical office and legacy industrial displays. Higher refresh rates or modern 1080p-and-above timings may exceed the switch's analog headroom. DDC2 pass-through helps the source detect the attached monitor, but some computers still need manual resolution adjustment. Buyers who need simultaneous dual-monitor output or digital HDMI and DisplayPort signals cannot use this device.

How it compares

Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.

Price $23.99
Cheaper than about 60% of the 1,998 comparable items (median $27.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDTECH
Product lineVGA Switch
Model nameDT-7032
Product typeVGA Switchers
Product colorGray
Performance
Bandwidth rating500 MHz
Display
Maximum supported resolutions1920 × 1440
Audio & video
SoundNo
Ports & slots
Port count2
Input ports2
Output ports1
Connector typeStandard
In the box
Units per package1
In the box1 × 2 Port VGA Switch (2 In 1 Out)

Questions about this item

What resolution does the 500 MHz VGA bandwidth support?

The 500 MHz bandwidth supports a maximum resolution of 1920x1440 for widescreen monitors.

What physical space does the DT-7032 metal enclosure need?

The compact metal enclosure has rubber feet for desk protection; it sits on a flat surface and connects via standard VGA cables.

How do I set up the bi-directional switch for two computers sharing one monitor?

Connect both computers to the two input ports and the monitor to the single output port, then press the button to switch sources.

More in HDMI & AV Selector Switches

Similar items