We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 6-cell Li-Ion pack in blue PVC shrink with wire leads

DUSLAN

DUSLAN 22.2V 2600mAh 6-cell Li-Ion battery pack with protection IC

SKU CH-KVZZ-D6V5C

A 22.2 V, 2600 mAh lithium-ion pack built from six 18650 cells with an integrated protection PCB and polyswitch for safe charging and discharging

  • Battery typeBattery Pack
  • 2 V nominal voltage powers 6-series equipment
  • 2600 mAh capacity from six 18650 cells delivers extended runtime
  • 6 A PCB plus 2 A polyswitch guards against over-charge, over-discharge and short circuits
  • UN 38.3 certification confirms safe transport compliance
  • 312 g weight and 109 × 71 × 19 mm footprint keep installations light and compact

Six-cell 22.2 V pack for custom builds

This DUSLAN battery pack assembles six 18650 cells into a 22.2 V, 2600 mAh lithium-ion module. It targets engineers, hobbyists and repair technicians who need a compact power source for portable equipment, robotics or test rigs. The integrated protection IC guards against over-charge, over-discharge, over-current and short circuits. The pack arrives new and ready for integration.

Continuous current limited to 2 A by polyswitch

The on-board polyswitch caps sustained discharge at 2 A and also blocks reverse polarity, making this the decisive spec for any load that draws more. Peak voltage reaches 25.9 V, while the protection PCB cuts output at 16.5 V and trips at 6 A. Maximum charge current is 2 A, so the pack suits low-to-moderate power designs only.

Solder-ready leads in a 109 × 71 × 19 mm PVC sleeve

The module measures 4.3 by 2.8 by 0.75 inches and weighs 11 oz, wrapped in heat-shrink with 18-gauge wire tails for direct soldering. No connector is fitted, so verify polarity before applying heat. The UN 38.3 transport certification eases shipping, but the 2 A discharge ceiling rules out high-drain motors or heaters.

How it compares

Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.

Price $91.99
Pricier than about 91% of the 10,440 comparable items (median $10.99).

Specifications

Power
Battery typeBattery Pack

Questions about this item

What does the 22.2 V working voltage mean once the pack is installed in a device?

It means the pack delivers a nominal 22.2 V while powering the load; voltage will read near 25.9 V at full charge and drop toward 16.5 V before the protection cuts off.

How does the on-board protection circuitry limit real-world current draw?

The PCB is rated at 6 A for over-charge, over-discharge and short-circuit trips, while a 2 A polyswitch caps continuous discharge and blocks reverse polarity.

Will the 109 mm × 71 mm × 19 mm pack fit in my existing battery bay?

The pack measures 4.3" long, 2.8" wide and 0.75" high, weighs 312 g, and exits via 18 AWG wire leads wrapped in PVC shrink.

More in Household Batteries & Chargers

Similar items