Dynaquip Controls EHH23ATE20H 1/2 in 600 psi 12V 24V IP66 2.5 sec trap
Electrically actuated 1/2 in two-way ball valve rated to 600 psi with 12V or 24V operation, IP66 protection and 2.5 second cycle time
- Product typeDrain Components
- Main materialHAWA
- Product colorTransparent
- Electrically actuated for remote flow control
- 600 psi rating handles high-pressure systems
- Dual 12V DC and 24V AC/DC voltage flexibility
- IP66 enclosure resists dust and water ingress
- 5 second cycle time enables rapid actuation
1/2 in Brass Ball Valve with Electric Actuator
This two-way ball valve uses a chrome-plated brass ball and a straight two-piece body rated for 600 psi. It suits plumbing or fluid-control systems that need automated on/off control with a 12V DC or 24V AC/DC supply. The IP66-rated actuator includes a heater, position indicator and thermal overload protection.
Actuation Speed and Voltage Limits
The actuator rotates 90 degrees in 2.5 seconds, so rapid cycling applications must allow for this dwell time. Operation is limited to the listed 12V DC and 24V AC/DC inputs; other voltages are not supported. The fail-last behaviour means the valve holds its position if power is lost.
Connection and Seal Compatibility Check
The valve has a 1/2 in female NPT inlet, so mating pipework must match this thread type and size. Seat material is RPTFE and seals are PTFE and FKM; verify chemical compatibility with the intended fluid. Ensure the installation environment meets the IP66 rating requirements.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $355.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Dynaquip Controls |
| Model name | EHH23ATE20H |
| Product type | Drain Components |
| Product color | Transparent |
| Size & build | |
| Main material | HAWA |
Questions about this item
Should I pick the 12 V DC or the 24 V AC/DC version for my control panel?
Both voltages are built into the same actuator — apply 12 V DC or 24 V AC/DC to the same terminals and the valve will operate.
What does the 2.5 second cycle time mean when the valve is installed in a pipe?
The actuator rotates the ball through its full 90 degree stroke in 2.5 seconds, so the flow path opens or closes in that time once power is applied.
What does the IP66 rating limit in a wash-down area?
IP66 means the actuator enclosure is dust-tight and protected against powerful water jets, so it can withstand direct spray during equipment cleaning.
More in Drain Stoppers, Strainers & Traps
Similar items
Cherne 269008 Plug, Eyebolt, 14.88" Deflate L trap
- Drain Components
Dayton 3YU74 1/3 HP Submersible Sump Pump 115V AC Tether Float Switch
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Red Hat 8210G037 Solenoid Valve Trap 1/2 in 110V 120V AC
- Drain Components
- HAWA





