Dynaquip Controls EVA65AME21 1 in 600 psi 120V AC IP66 trap
Electrically actuated two-way ball valve with 316 stainless steel ball, 600 psi rating, 120 V AC operation and IP66 enclosure
- Product typeDrain Components
- Product colorTransparent
- Electrically actuated for remote flow control
- 600 psi rating handles high-pressure systems
- IP66 enclosure resists dust and water ingress
- 316 stainless steel ball resists corrosion
- 5-second cycle time enables fast response
Electrically Actuated 1 in Ball Valve
This electrically actuated two-way ball valve uses a 316 stainless-steel ball and PTFE seats to control fluid flow in industrial and commercial plumbing systems. It operates on 120V AC power and carries an IP66 rating for dust and water ingress protection. The straight-pattern, three-piece bronze body is rated for 600 psi maximum operating pressure.
Manual Override and Position Indicator
The actuator includes a manual override lever, a visual position indicator and built-in thermal overload protection. These features allow local operation during power loss, quick status checks and protection against motor overheating. The valve fails in its last position when power is removed.
2.5 Second 90 Degree Cycle Time
The actuator completes a full 90-degree stroke in 2.5 seconds, which determines how quickly the valve can open or close in automated sequences. This cycle time suits processes that require moderate actuation speed. Installers must verify that the system design accommodates this operating speed.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $383.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Dynaquip Controls |
| Model name | EVA65AME21 |
| Product type | Drain Components |
| Product color | Transparent |
Questions about this item
What maintenance will the PTFE seats and FKM seals need over time?
PTFE seats and FKM seals resist wear but should be inspected periodically for chemical attack or deformation, especially after exposure to aggressive fluids at the 600 psi rating.
Which limit appears first during continuous cycling — thermal overload or pressure rating?
Thermal overload protection in the actuator trips before the 600 psi body limit is reached during rapid, repeated 90-degree cycles.
How much heat and noise does the 120V AC actuator produce when running all day?
The actuator draws modest AC power, runs at IP66 without a fan, and emits only a quiet motor hum during each 2.5-second stroke.
More in Drain Stoppers, Strainers & Traps
Similar items
Red Hat EF8210G004 Solenoid Valve 2-Way Normally Closed 1 in 110V 120V AC 150 psi
- Drain Components
- HAWA
Dayton 3BB79 1/2 HP Submersible Sump Pump 120V AC Diaphragm 1-1/2" FNPT
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Zoeller 46-0005 Plug-In Utility Pump 115V AC 14.5in H
- Drain Components





