Dynaquip Controls PHS23AJD01A 115V AC Pilot Solenoid Trap
Pneumatically actuated 1/2 in stainless steel ball valve with 115V AC pilot solenoid, rated for 1,000 psi operating and 150 psi steam
- Product typeDrain Components
- Main materialHAWA
- Pneumatically actuated for automated flow control
- 316 stainless steel ball resists corrosion
- Full-port design maintains unrestricted flow
- 115V AC pilot solenoid enables electric actuation
- Rated to 1000 psi operating pressure
Pneumatically Actuated Ball Valve
The Dynaquip Controls PHS23AJD01A is a pneumatically actuated two-way ball valve designed for industrial fluid control. It suits engineers and maintenance teams needing reliable on-off or modulating service in process piping. The valve body is stainless steel with a 316 stainless steel ball. Operation is air-to-air with a fail-last safe position.
115V AC Pilot Solenoid
The included 115V AC pilot solenoid governs actuator response and determines electrical compatibility. Buyers must confirm their control circuit supplies 115V AC; other voltages will not operate this assembly. No alternative coil voltage is offered with this model.
Pressure Capacity 1000 psi Operating
Rated for 1000 psi maximum operating pressure and 150 psi steam, the valve handles high-pressure liquid and gas lines within those limits. It is not suited for systems exceeding 1000 psi or steam above 150 psi. Full-port design minimises flow restriction up to the rated ceiling.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $393.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Dynaquip Controls |
| Model name | PHS23AJD01A |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
How does the 115V AC pilot solenoid affect the valve's operation in a live system?
The 115V AC pilot solenoid controls the pneumatic actuator, switching the ball valve between open and closed positions when energised or de-energised.
What does the 1,000 psi operating pressure rating limit in an installation?
The 1,000 psi rating sets the maximum safe working pressure for the valve body and seals under normal service conditions.
What pipe thread size and material are required to mount this valve?
The valve uses a 1/2 in FNPT stainless steel connection, requiring matching male NPT threads for a sealed joint.
More in Drain Stoppers, Strainers & Traps
Similar items
Westward 5TCU1 Oil Pump Air Operated 3:1 Ratio 275 gal
- Drain Components
Zoeller 46-0005 Plug-In Utility Pump 115V AC 14.5in H
- Drain Components
Red Hat EF8210G004 Solenoid Valve 2-Way Normally Closed 1 in 110V 120V AC 150 psi
- Drain Components
- HAWA





