Dyno Racing 52mm Air Fuel Ratio Gauge Smoke Lens
A 52mm narrowband air-fuel ratio gauge with a smoke-tint lens, super-white LED display and red illuminated needles for 12V systems
- Gauge typeAir Fuel Ratio
- Product typeGauges
- 52 mm diameter fits standard gauge pods
- Smoke tint lens stays subtle by day and glows clear at night
- Super-bright white LEDs with red needles give instant air-fuel readout
- Narrowband sensor input works with 12 V vehicle systems
- Mounting hardware and English manual included for straightforward install
What this gauge does
The Dyno Racing 52mm Air Fuel Ratio Gauge mounts in a standard 52mm cutout and reads exhaust oxygen through a narrowband sensor. It is intended for drivers who want a quick visual check of mixture richness while tuning or monitoring a petrol engine.
Critical spec: narrowband operation
This unit works only with a narrowband sensor, which switches sharply around the stoichiometric point rather than reporting a continuous lambda value. Builders who need precise wideband data for forced-induction or race calibration should look elsewhere.
Thermals, noise and power draw
The gauge draws a maximum of .3 amps on both ignition and illumination circuits from a 10 to 15 volt DC supply, typical of a 12 volt vehicle system. It has no moving parts or fan, so it runs silently and adds negligible heat to the dashboard.
How it compares
Measured against everything we stock in Gauges & Tachometers, at today’s prices. Recalculated every night.
- Price $37.99
- Typical for this category: the median of 193 items is $35.99.
Specifications
| Product | |
|---|---|
| Product type | Gauges |
| More details | |
| Gauge type | Air Fuel Ratio |
Questions about this item
What does the narrowband air-fuel ratio reading tell me while driving?
The narrowband gauge shows whether the mixture is richer or leaner than the ideal stoichiometric point so you can spot sudden changes during acceleration or load.
What voltage range does the gauge need from the vehicle electrical system?
It operates on a DC supply between 10 V and 15 V, drawing up to 0.3 A on both the ignition and illumination circuits.
What size hole must I cut in the dashboard or panel to mount the gauge?
Cut a 52 mm diameter opening and secure the unit with the supplied mounting clamps.
More in Gauges & Tachometers
Similar items
Dyno Racing 52mm 12V Digital Fuel Level Gauge 0-100%
- Fuel Pressure
- Gauges
General Tools & Instruments 722 Vernier Caliper Gauge
- Card
- Caliper
Dyno Racing Water Temp Gauge 52mm 40-120°C 32mm Adapter
- Oil Temp
- Gauges
Small Level Mini Bubble 90°/180° Spirit Level Magnetic 2.95 Inch Shatterproof Cross Check Pocket Level gauge
Dyno Racing 52mm Water Temp Gauge 40-120 °C 1/8 NPT 38mm Adapter
- Oil Temp
- Gauges





