Corsair RM750e CP-9020295-NA 750 W power supply
- Black
- ATX 3.1 Compatible
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Delivers 800 W through a non-modular ATX/EPS12V design with dual 12 V rails, a 140 mm fan, active PFC and 75% efficiency
The E-POWER EP-800PM delivers 800 W across two +12 V rails rated at 20 A each, with a 24+8 pin main connector and active PFC. It is built for desktop systems that need SLI or CrossFire support and Haswell compatibility. The non-modular design keeps all cables attached for a fixed wiring layout.
Installation means routing every fixed cable, including two 6-pin and two 6+2-pin PCIe leads plus eight SATA power plugs. The single 140 mm fan handles cooling, so the 160 mm case depth must be clear. Cable bulk behind the motherboard tray can restrict airflow if the chassis is tight.
Check that the motherboard accepts the 24+8 pin main power and that the graphics cards match the available PCIe connectors. Verify the chassis fits a 160 mm deep unit and that the 115/230 V input switch matches the local mains. The 75 % efficiency rating and fixed cable set suit builds that do not need modular flexibility.
Measured against everything we stock in ATX Desktop Power Supplies, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ePOWER |
| Product line | PM |
| Model name | EP-800PM |
| Product type | ATX12 V / EPS12 V |
| Graphics | |
| SLI support | Ready |
| CrossFire support | Ready |
| Ports & slots | |
| PCIe power connectors | 2 × 6-Pin, 2 × 6+2-Pin |
| SATA power connectors | 8 |
| Output type | +3.3 V@26A, +5 V@26A, +12V1@20A, +12V2@20A, +5VSB@3A |
| Connection types | 1 x ATX 24pin & 20 pin 1 x ATX 4+4 pin 2 x PCI-Express 6+2 pin 2 x PCI-Express 6 pin 8 x SATA 8 x Molex 4 pin 2 x FDD |
| Power | |
| Max wattage | 800 W |
| Power efficiency | 75% Efficiency Rating |
| Modular cabling | Non-Modular |
| Power factor correction | Active |
| Main power connector | 24+8Pin |
| 12V rails | 2 |
| Supply voltage | 115 / 230 V |
| AC input frequency | 50/60 Hz |
| Rated input current | 10–6A |
| Size & build | |
| Product dimensions | 6.3 in × 5.9 in × 3.4 in |
| Compatibility | |
| Haswell compatibility | Yes |
| PSU length limit | 160 mm |
| More details | |
| Fan configuration | Single 140 mm Cooling Fan |
Check that the 140mm fan spins and the system boots without shutdowns; a multimeter on the 24+8Pin main connector should show +12V rails near 12V and +5V near 5V under load.
The unit ships with a fixed 24+8Pin main connector, two 6-Pin and two 6+2-Pin PCIe cables, and eight SATA power leads; no extra cables are included.
This single EP-800PM model already provides two 6-Pin and two 6+2-Pin connectors, covering SLI or CrossFire setups without a second variant.
More in ATX Desktop Power Supplies
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?