We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton steel hydraulic hose fitting, 45-degree elbow, 3/4 inch hose, female JIC swivel

Eaton

Eaton 1AA12FJA12 45° 3/4" Hose 1-1/16-12 JIC Vacuum Accessory

SKU CH-RGWM-Z0TXD MPN 1AA12FJA12

A 45-degree elbow fitting connects 3/4-inch hose to a 1-1/16-12 JIC swivel with a 37-degree thread angle and 3.43-inch length

  • Product typePart
  • 45-degree elbow routes hose in tight spaces
  • 3/4 inch hose ID matches standard hydraulic lines
  • Female JIC 1-1/16-12 swivel seals under pressure
  • Steel body with trivalent chromium zinc finish resists corrosion
  • Meets SAE 100R1, SAE 100R2 and GH793 standards

Eaton 45° 3/4" Hose JIC Fitting

This Eaton hydraulic hose fitting provides a 45-degree elbow connection for 3/4-inch inner diameter hose. It features a female JIC swivel thread sized 1-1/16-12 and a crimpable design. The steel construction includes a ROHS trivalent chromium zinc finish.

Suits 45-degree routing on SAE 100R1, 100R2.

This part suits hydraulic assemblies requiring a 45-degree bend on compatible hose types with dash size 12. Builders needing a different elbow angle, thread standard, or hose diameter should select an alternative fitting.

Thread angle 37 degrees

The JIC sealing surface uses a 37-degree flare angle, which determines compatibility with matching male fittings. Verify this angle matches the rest of your hydraulic circuit before ordering.

How it compares

Measured against everything we stock in Vacuum Parts & Batteries, at today’s prices. Recalculated every night.

Price $40.99
Pricier than about 71% of the 131 comparable items (median $26.99).

Specifications

Product
Brand nameEaton
Model name1AA12FJA12
Product typePart

Questions about this item

What size hose do I already need for the 3/4 in. I.D. on this Eaton 1AA12FJA12 fitting?

You need a 3/4 inch inside-diameter hydraulic hose, which corresponds to dash size 12, to match the crimpable end of this 45-degree elbow.

Will the 1-1/16-12 JIC thread on this fitting mate with the SAE 100R1 and SAE 100R2 hoses I already run?

Yes, the female JIC swivel thread is built to SAE 100R1, SAE 100R2 and GH793 standards, so it connects directly to those hose assemblies.

How can I confirm the 45-degree elbow is oriented correctly after I crimp it on?

Measure the centre-line angle; it should be 45 degrees with a 37-degree thread angle, and the overall length should be 3.43 inches from end to end.

More in Vacuum Parts & Batteries

Similar items