We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver toggle switch with screw terminals and panel mount

Eaton

Eaton 7690K8 Toggle Switch 4PST 10A 250V Screw

SKU CH-04M1-S6TX0

Four-pole single-throw toggle switch rated 10 A at 250 V AC with screw terminals and a 0.50 in mounting hole

  • Product typeIndustrial Electrical Controls & Automation
  • Four-pole single-throw switching handles two separate circuits
  • 10 A at 250 V AC rating suits industrial control panels
  • 15 A at 125 V AC provides flexibility for lower-voltage loads
  • Screw terminals give secure, vibration-resistant wire connections
  • CSA, RoHS and UL listed for code-compliant installations

Industrial Toggle Switch for Panel Mounting

The Eaton 7690K8 is a four-pole single-throw toggle switch rated at 10 A at 250 V AC and 15 A at 125 V AC. It provides on/off control for industrial electrical panels and automation equipment. The switch mounts through a 0.50 in diameter hole and includes panel mounting hardware. It carries CSA, RoHS and UL Listed certifications.

Thermals Noise and Power Draw

As a passive electromechanical component the switch generates no operational noise and draws no power of its own. The silver actuator and stem run at ambient temperature during normal switching duty. Contact resistance remains low across the 3/4 hp rated load. No active cooling or thermal management is required for the device.

Screw Terminals and Mounting Hardware

Screw terminals accept ring or fork lugs for secure wire attachment without soldering. The 0.500 in stem diameter and thread size match standard panel cutouts. Included mounting hardware allows immediate installation in enclosures or control consoles. The 0.68 in actuator length provides positive tactile feedback for gloved operation.

How it compares

Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 70% of the 1,411 comparable items (median $39.99).

Specifications

Product
Brand nameEATON
Product typeIndustrial Electrical Controls & Automation

Questions about this item

How do I install the Eaton 7690K8 toggle switch in a .50 in mounting hole and which step is often missed?

Drill a .50 in panel hole, insert the .500 in threaded stem, secure with the supplied mounting hardware, then tighten the screw terminals; the step often missed is torquing each terminal screw to prevent loose connections under vibration.

What maintenance or replacement will the Eaton 7690K8 toggle switch need over time?

Inspect the screw terminals periodically for carbon buildup or loosening; if contact resistance rises or the actuator feels gritty, replace the entire switch — no internal parts are serviceable.

At sustained loads near 10 A 250 V AC, what limit appears first on the Eaton 7690K8 toggle switch?

The 10 A 250 V AC contact rating is the first limit; continuous operation at or above this current will cause contact heating and accelerated wear before any mechanical or thermal limit is reached.

More in Electrical Enclosures & Cabinets

Similar items