We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent industrial contactor, DIN-rail mount, screw terminals, 2.5 in wide

Eaton

Eaton XTMC6A10C 480VAC 3P 6A video accessory

SKU CH-4PDN-FZJR1

Miniature IEC magnetic contactor with 1NO auxiliary contact, 480 V AC coil, 6 A inductive rating, screw terminals, DIN-rail or panel mount

  • Product typeIndustrial Electrical Controls & Automation
  • Product colorTransparent
  • IEC miniature contactor fits tight panels at 2 in height
  • 415/480 V AC coil suits industrial three-phase supplies
  • 3-pole non-reversing design handles 6 A inductive loads
  • Screw terminals on DIN rail or panel mount simplify wiring
  • Auxiliary 1 NO contact enables status feedback circuits

Eaton XTMC6A10C Miniature Contactor

The Eaton XTMC6A10C is a miniature IEC magnetic contactor built for three-phase motor control circuits. It suits industrial electricians and panel builders who need a compact, non-reversing starter component rated for 6 amps inductive load. The unit mounts on DIN rail or directly to a panel and uses screw terminals for secure wiring. Its transparent housing allows visual inspection of contact status during commissioning or maintenance.

Before ordering check coil voltage

Verify that your control circuit supplies 415 or 480 volts AC to match the contactor coil rating. The device carries no NEMA enclosure rating, so confirm the panel or cabinet provides the required environmental protection for your installation. Ensure the available mounting space accommodates the 2 inch height and 2.5 inch width. The single normally-open auxiliary contact supports one signalling or interlock function; plan wiring accordingly if additional contacts are needed.

Sustained load performance within rated limits

Under continuous operation the contactor handles 6 amps inductive and 20 amps resistive full-load current at the rated coil voltage. The IEC frame size A construction is designed to maintain reliable pull-in and drop-out over extended duty cycles without overheating. Screw terminal connections resist loosening from vibration, preserving consistent contact resistance during prolonged use. The non-reversing design simplifies the control circuit, reducing failure points in long-running motor starter applications.

How it compares

Measured against everything we stock in AV Accessories & Components, at today’s prices. Recalculated every night.

Price $35.99
Cheaper than about 55% of the 3,838 comparable items (median $41.99).

Specifications

Product
Brand nameEaton
Model nameXTMC6A10C
Product typeIndustrial Electrical Controls & Automation
Product colorTransparent

Questions about this item

What comes in the box with the XTMC6A10C contactor and what must be purchased separately?

The contactor itself is supplied with one built-in 1NO auxiliary contact and screw terminals for wiring. No enclosure, DIN rail, panel-mount hardware, coil-suppression module or extra auxiliary blocks are included; those items must be sourced separately.

How do I choose between the 415 V and 480 V coil-voltage ratings shown for this model?

Select the rating that matches your control-circuit supply: use the 415 V tap for 400–415 V systems and the 480 V tap for 480 V systems. The contactor is a single dual-voltage unit, so no separate version needs to be ordered.

What does the 6 A inductive current rating mean when the contactor is installed in a motor circuit?

It defines the maximum inductive load the three main poles can switch repeatedly — up to 6 A at 480 V AC — while the resistive rating of 20 A applies only to non-inductive loads such as heaters.

More in AV Accessories & Components

Similar items