Ecco ED3744AR Warning Light Amber/Red 12-24V
SAE J595 Class 1 LED warning light with amber/red flash, IP67 rating and 12-24V operation for permanent mounting
- Product colorAmber/Red
- SAE J595 Class 1 rating ensures high-visibility warning signals
- IP67 sealing protects against dust and water ingress
- Dual amber/red LEDs cover multiple alert requirements
- 12-24V DC operation suits a wide range of vehicles
- Low 7.6 W draw minimises electrical load
Purpose and fit
The Ecco ED3744AR is a rectangular LED warning light that flashes amber and red for perimeter marking on recreational vehicles, trailers and utility trucks. It meets SAE J595 Class 1 visibility requirements and operates on 12-24V DC electrical systems. The IP67 rating makes it suitable for permanent exterior mounting in wet or dusty conditions.
Thermals noise and power
The unit draws 7.6 W from the vehicle supply and uses eight LED heads that produce minimal heat during continuous flashing. No moving parts or cooling fans are present so operation is completely silent. Low current draw allows it to run on standard RV lighting circuits without additional relays or oversized wiring.
Build and connections
A clear polycarbonate lens covers the eight heads in a housing measuring 4 11/16 in long, 1 3/8 in high and 5/8 in deep. Blunt-cut wires exit the rear for direct splicing into the vehicle harness; no plug-and-play connector is supplied. The sealed IP67 enclosure resists water ingress and vibration but the light is not designed for recessed mounting or applications requiring a synchronized flash pattern across multiple units.
How it compares
Measured against everything we stock in 12V LED Lights & Light Bars, at today’s prices. Recalculated every night.
- Price $68.99
- Pricier than about 59% of the 153 comparable items (median $53.99).
Specifications
| Product | |
|---|---|
| Brand name | ECCO |
| Product color | Amber/Red |
Questions about this item
How do I install the Ecco ED3744AR warning light and which step is commonly missed?
Connect the blunt-cut wires to a 12-24V DC supply for permanent mounting; the step often missed is sealing every wire entry to preserve the IP67 rating.
What maintenance or replacement will the Ecco ED3744AR need over time?
The sealed LED heads are not serviceable; if output drops below SAE J595 Class 1 after years of flashing, the whole 7.6 W unit is replaced.
What limit appears first when the Ecco ED3744AR runs continuously?
Thermal limits inside the IP67 housing cap sustained output before the 12-24V DC supply or wiring becomes the bottleneck.
More in 12V LED Lights & Light Bars
Similar items
IPCW LEDT-343BPC Hummer H2 2005-2008 Rear Bumper Lights Crystal Clear
- 2008 Hummer H2 Bump…
- Performance
IPCW LEDT-343BPCB Hummer H2 2005-2008 Rear Bumper Lights Bermuda Black RV Lighting
- 2005 Hummer H2 Bump…
- Performance





