We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent crimp tool, 10 in overall length, ergonomic handles

Eclipse

Eclipse CP-3006FS2 10 in Crimp Tool

SKU CH-CNFN-DRR2S

Crimps MC4 connectors on 10, 12 and 14 AWG wires with ergonomic handles in a 10 in frame

  • Product colorTransparent
  • Ergonomic handle reduces fatigue during extended use
  • Crimps MC4 connectors for secure solar connections
  • Works with 10, 12, 14 AWG and 2.5, 4.0, 6.0 mm DIN wire sizes
  • 10 in overall length provides strong leverage
  • 2 1/8 in jaw length accommodates various connector types

Eclipse CP-3006FS2 Crimp Tool

The Eclipse CP-3006FS2 is a 10 in crimp tool designed for installers working with MC4 connectors. It handles wire sizes 10 AWG, 12 AWG and 14 AWG as well as DIN 2.5 mm, 4.0 mm and 6.0 mm profiles. The ergonomic handle reduces fatigue during repetitive field terminations. This tool suits solar technicians who need reliable crimps on standard photovoltaic connectors.

Thermals noise and power draw

As a manual hand tool the CP-3006FS2 produces no operational heat and draws no electrical power. It operates silently without fans, motors or electronic circuitry. The only physical effort comes from the user squeezing the ergonomic handles. There are no thermal limits or duty-cycle restrictions to observe.

Bundled accessories and software

The product ships as a single crimp tool with no additional dies, cases or calibration certificates included. No software, firmware or digital configuration is required or provided. Users must source compatible MC4 connectors and wire separately. The transparent colour allows quick visual inspection of the jaw alignment before each crimp.

How it compares

Measured against everything we stock in HDMI, VGA & USB Splitters, at today’s prices. Recalculated every night.

Price $49.99
Pricier than about 80% of the 247 comparable items (median $17.99).

Specifications

Product
Brand nameECLIPSE
Product colorTransparent

Questions about this item

How do I position the MC4 connector in the 2 1/8 in jaws before crimping 10 AWG wire?

Insert the stripped 10 AWG conductor into the MC4 contact, seat the contact fully in the 2 1/8 in jaw nest matching the DIN 6.0 mm profile, then squeeze the ergonomic handles until the ratchet releases.

Which parts wear first when crimping 12 AWG and 14 AWG daily?

The hardened jaw inserts for DIN 2.5 mm and DIN 4.0 mm profiles show wear first; replace the jaw set when crimp height falls outside MC4 specification.

At what point does hand fatigue limit repeated crimps on 10 AWG?

The 10 in overall length gives a fixed leverage ratio; after roughly 300 consecutive 10 AWG crimps grip force drops enough to risk incomplete ratchet engagement.

More in HDMI, VGA & USB Splitters

Similar items