We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black rectangular bookshelf speakers with front headphone jack and volume knob

Edifier MR3 2.0 Powered Studio Monitors 42W Black Pair

SKU CH-FX1N-RA770

Powered studio monitors with Hi-Res Audio certification, 42 W total output, Bluetooth 2.0 and balanced TRS, RCA, AUX inputs plus headphone output

  • Channel configuration2.0
  • Total wattage42 W
  • RMS power per satellite42 W
  • Driver unitDynamic driver
  • Frequency range40 kHz
  • Signal-to-noise ratio85 decibels
  • Hi-Res Audio certified for accurate 52Hz–40kHz monitoring
  • 42 W total power with 3.5″ drivers and 1″ tweeters
  • Balanced TRS, RCA, AUX inputs plus front headphone output
  • Switchable Music, Monitor and Custom EQ modes via app
  • MDF cabinet reduces distortion for studio and daily use

Edifier MR3 42W Studio Pair

The Edifier MR3 is a 2.0 powered monitor pair built for desktop audio production, video editing and critical listening. Each speaker delivers 18W RMS from a Class-D amplifier operating at 24-bit/96kHz for bit-perfect conversion. Hi-Res Audio certification confirms a flat response suited to mixing and mastering tasks.

18W RMS per Channel Headroom

The dual 3.5-inch mid-low drivers and 1-inch tweeters produce a peak SPL of 92.5dB with 85dB signal-to-noise ratio. Frequency response spans 52Hz to 40kHz, covering deep lows and extended highs for detailed monitoring. Bass-heavy material at very high volumes will reach the limits of the 3.5-inch woofers before the amplifier clips.

Balanced TRS RCA AUX Bluetooth 2.0

Balanced TRS, unbalanced RCA and 3.5mm AUX inputs accept simultaneous sources, while a front-panel headphone output enables private monitoring. Bluetooth 2.0 supports multi-point pairing for wireless playback. The EDIFIER ConneX app provides Music, Monitor and Custom EQ modes for room compensation.

How it compares

Measured against everything we stock in Desktop Speakers & Soundbars, at today’s prices. Recalculated every night.

Price $124.99
Pricier than about 90% of the 838 comparable items (median $40.99).

Specifications

Product
Brand nameEdifier
Model nameEdifier-mr3-black-fba
Part numberEdifier-mr4-mr3
Product typeMonitor
Product colorBlack
Audio & video
Channel configuration2.0
RMS power per satellite42 W
Driver unitDynamic driver
Frequency range40 kHz
Signal-to-noise ratio85 decibels
Power
Total wattage42 W
Size & build
Measurements12.55 in × 18.5 in × 22.0 in
Product weight5.06 kg
In the box
In the boxWarranty Card
More details
Control methodApplication

Questions about this item

Can I connect the Edifier MR3 monitors to an older audio interface that only has unbalanced RCA outputs?

Yes, the speakers include RCA inputs alongside balanced TRS and 3.5 mm AUX, so a standard RCA cable from your interface will work without adapters.

How can I verify the MR3 monitors are reproducing the full 52 Hz to 40 kHz Hi-Res range after setup?

Play a 24-bit/96 kHz test sweep through the ConneX app in Monitor mode; the flat response certification means you should hear consistent output across the entire stated bandwidth.

What cables come in the box with the MR3 pair and which ones must I buy separately?

Only a warranty card is listed in the package contents; you will need to supply RCA, TRS, 3.5 mm AUX or speaker cables depending on which inputs you use.

More in Desktop Speakers & Soundbars

Similar items