We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular PoE injector adapter with RJ45 ports

EDUP

EDUP Starlink PoE Injector Adapter Kit V2 RJ45 T568B 10/100/1000 Mbps -20 to +55 °C Black EP-RT9605

SKU CH-ZSJN-NWRET

Connects a Starlink V2 dish to a PoE injector using RJ45 T568B wiring at up to 1000 Mb/s and operates from -20 to +55 °C

  • Reliable gigabit speeds up to 1000 Mb/s via T568B wiring
  • Operates from -20 °C to +55 °C in harsh climates
  • Humidity tolerance 10 % to 90 % non-condensing
  • Survives storage extremes from -40 °C to +70 °C
  • Powers Starlink V2 dish through PoE injector for simple setup

Starlink V2 PoE Adapter Kit

This adapter kit connects a Starlink Satellite Dish V2 to a Power over Ethernet injector using RJ45 connectors wired to the T568B standard. It is intended for installers or home users who need a wired Ethernet link from the dish to their network equipment. The kit provides the physical interface required for both data and power delivery over a single cable run.

Operating Range -20 to +55 °C

The unit operates reliably across a temperature span of -20 to +55 °C and tolerates humidity from 10% to 90% non-condensing. Storage limits extend from -40 to +70 °C for long-term durability. As a passive PoE injector adapter, it adds no active cooling or power draw of its own, leaving thermal load and noise entirely dependent on the connected injector and network switch.

Black Housing with Gigabit RJ45 Ports

The black enclosure houses RJ45 ports rated for 10/100/1000 Mb/s Ethernet throughput. T568B pinout ensures compatibility with standard Category 5e or better cabling. No mounting hardware or additional connectors are included, so installers must provide their own cable management and strain relief for outdoor or indoor routing.

How it compares

Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 60% of the 1,221 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the EP-RT9605 kit and which wiring step is often missed?

Connect the Starlink Dishy cable RJ45 plug into the injector port using the T568B pinout, then link the injector LAN port to your router; the step often missed is confirming both ends follow T568B rather than T568A.

What maintenance or replacement will the EP-RT9605 need over time?

Inspect RJ45 contacts for corrosion and reseat cables annually; the injector itself has no moving parts, so only the Ethernet patch cords typically require replacement if damaged.

Which limit appears first on the EP-RT9605 during sustained heavy traffic?

The 1000 Mbps Ethernet link saturates before the injector reaches its 55 °C operating ceiling, so throughput caps at the port speed under continuous load.

More in Network Adapters & RJ45 Plugs

Similar items