Rheem Resistored HWD Element Copper 240V 4500W Threaded Accessory
- Threaded
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Compact 7.5 kW electric tankless heater delivers on-demand hot water at up to 2 gpm for undersink installations
The Eemax SPEX75 is an electric tankless water heater designed for undersink installation in commercial environments. It serves kitchen sinks, lavatory faucets, metering faucets and sensor faucets with on-demand hot water. The unit operates on single-phase 240 V AC power and draws 32 A at 7,500 W. It is not suited for whole-house demand or installations requiring higher flow rates.
Under continuous use the heater maintains a maximum delivered temperature of 140 Degrees F and a minimum of 70 Degrees F. Activation requires a flow of at least 0.7 gpm and the unit tops out at 2 gpm. These limits define the steady-state envelope; the heater cannot supply more hot water than the 2 gpm ceiling regardless of inlet conditions. The compact frame measures 10.75 in high, 5.25 in wide and 3 in deep.
The single specification that determines whether this heater fits the job is the 2 gpm maximum flow rate. If the connected fixtures demand more than 2 gpm simultaneously, the unit will not meet the load. Buyers who need higher simultaneous flow should look elsewhere. The cold inlet uses a 3/8 in compression fitting for straightforward plumbing.
Measured against everything we stock in Water Heater Parts & Add-Ons, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | EEMAX |
| Product type | Water Heaters |
The unit has no fan or compressor, so it operates silently while heating water on demand.
A dedicated 240 V single-phase circuit rated for at least 32 A is required.
It needs a minimum flow of 0.7 gpm to start heating, so very low-flow fixtures may not trigger it.
More in Water Heater Parts & Add-Ons
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?