Klein Tools
Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
$24.99
0.00030942BTC
In stock
Electronix Express 30 Gauge Wire Wrap Tool
Strips, wraps and unwraps 30 gauge wire for solder-free point-to-point prototyping connections
- Strips, wraps and unwraps 30 gauge wire in one tool
- Eliminates cold or dry joints by removing soldering from prototypes
- Speeds up point-to-point wiring for prototype builds
- Handles 30 gauge wire without damaging conductors
- Unwrap function allows quick corrections during development
30 Gauge Wire Wrap Tool
This electrician tool strips, wraps and unwraps 30 gauge wire in a single handheld unit. It is designed for engineers and hobbyists who need reliable point-to-point connections without soldering. The cold-joint risk associated with soldering is removed entirely. Prototyping and repair work become faster and more repeatable.
Suited to prototype builders and repair technicians
Users who require soldered joints for mechanical strength or high-current paths should choose a different method. The tool only accepts 30 gauge wire, so thicker conductors cannot be processed. Anyone needing multi-gauge capability or automated production speeds will find this tool too limited.
Handles 30 gauge wire comfortably
The tool cleanly strips insulation, forms tight wraps and can unwrap connections for rework. It runs out of utility when wire diameter exceeds the single supported gauge or when the application demands soldered reliability. Volume production will also outpace its manual operation.
How it compares
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
- Price $16.99
- Cheaper than about 92% of the 5,006 comparable items (median $95.99).
Specifications
| Product | |
|---|---|
| Brand name | Electronix Express |
Questions about this item
What gauge wire must I have on hand for this tool to strip, wrap and unwrap?
You need 30 gauge wire; the tool is built specifically for that size and will not work correctly with thicker or thinner conductors.
Can I use this tool to modify connections on a board that already has larger-gauge wraps in place?
The tool only handles 30 gauge wire, so existing larger-gauge wraps must be removed with a different tool before you can rework the connections with this one.
How can I confirm a wrap is gas-tight after using the tool?
Inspect the joint under magnification — a correct wrap shows at least six tight turns of 30 gauge wire with no visible gaps between the turns and the post.
More in Electrical Trade Tools & Kits
