We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short multicolour cable with a straight Molex 4-pin plug at one end and a right-angle SATA 15-pin socket at the other

EN-Labs

EN-Labs IDE2SATA890 Molex 4-pin to SATA 15-pin 90 degree 8 inches power adapter cord

SKU CH-B6JH-K0RSM

Connects a Molex 4-pin power supply output to a right-angled SATA 15-pin drive using 20AWG copper over 8 inches

  • Connector count2
  • Connector genderMale to Female
  • Product typePower
  • Product colorMulti-Color
  • Overall length6 in - 10 in
  • DetailsType :SATA power Adapter cable Length: 8 in Conductor:20AWG
  • Connect SATA drives to legacy Molex power supplies
  • 90-degree SATA connector fits tight drive bays
  • 20AWG copper conductors deliver stable 12V/5V power
  • 8-inch length suits compact desktop or server builds
  • Supports both 2.5 and 3.5-inch SATA hard drives

What This Adapter Does

This EN-Labs IDE2SATA890 cable converts a standard Molex 4-pin male connector from a power supply into a SATA 15-pin female connector with a 90-degree profile. It uses 20AWG copper conductors and spans 8 inches, delivering 12V and 5V power to SATA hard drives or SSDs in desktop or server builds.

Who It Suits And Who It Does Not

Builders needing to power 2.5-inch or 3.5-inch SATA drives from older power supplies that only offer LP4 Molex outputs will find this adapter fit for purpose. Systems that require a straight-angle SATA power plug or a longer reach than 8 inches should look at alternative cables.

The Spec That Decides Fit

The 90-degree SATA 15-pin female connector determines whether the adapter clears tight drive bays or crowded backplanes; verify the orientation matches your chassis layout before ordering.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 94% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Model nameIDE2SATA890
Product typePower
Product colorMulti-Color
Ports & slots
Connector count2
Connector genderMale to Female
Size & build
Overall length6 in - 10 in

Questions about this item

Does the 90 degree SATA connector fit both 2.5 and 3.5 inch drives?

The right-angle 15-pin plug is designed to mate with standard SATA power ports on both 2.5 and 3.5 inch drives, so it works with either form factor.

What does the 12V/5V rating mean for my SATA device?

The adapter passes both 12 V and 5 V rails from the Molex source, supplying the voltages a SATA drive expects for its motor and logic circuits.

Will the 20AWG copper wire handle the current a SATA SSD or HDD draws?

20 AWG copper is rated for several amps, well above the typical draw of a SATA SSD or hard drive, so the cable will not limit power delivery.

More in Jumper & Adapter Power Cords

Similar items