We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCIe 1X to 16X riser board with three capacitors, 60cm blue USB 3.0 cable, Molex 4-pin power connector

EN-Labs

EN-Labs PCIe Riser Cable 1X to 16X 60cm USB 3.0 Molex 4pin

SKU CH-9W62-TWQ0E

Extends a PCIe x1 slot to x16 with a 60cm USB 3.0 cable and Molex power, adding three solid capacitors, voltage regulation and overcurrent protection for stable GPU mining

  • Product typePCIe Riser Cable
  • Key features3 High Quality Solid Capacitors, Voltage Regulation, and Ove
  • Solid capacitors and protection circuits stabilise GPU power delivery
  • 60 cm USB 3.0 cable gives flexible graphics-card placement
  • Molex 4-pin power draws from separate rails to ease motherboard load
  • Works with 1x, 4x, 8x and 16x PCIe slots for broad compatibility
  • Set BIOS to Gen 2 or Gen 1 if the card is not detected

PCIe 1X to 16X riser for GPU placement

This riser cable adapts a PCIe x1 motherboard slot to accept a full-length x16 graphics card. A 60cm USB 3.0 cable gives installers freedom to position the GPU away from the board. The kit targets builders assembling open-air mining rigs or compact systems where direct slot mounting is impractical.

Signal quality limited to PCIe Gen 2 or Gen 1

The supplier notes that the graphics card may not be identified unless the motherboard BIOS is set to PCIe Gen 2 or Gen 1. Running the link at Gen 3 speeds is not supported by this cable, so bandwidth-sensitive workloads will operate at reduced throughput compared with a native x16 slot.

Molex 4-pin power input isolates GPU draw

Three solid capacitors and on-board voltage regulation feed the card through a Molex 4-pin connector, pulling current from the power supply instead of the motherboard slot. This reduces strain on the board’s power delivery but requires a free Molex lead from the PSU; systems without spare Molex connectors cannot use the riser without an adapter.

How it compares

Measured against everything we stock in Worldwide Power Cords, at today’s prices. Recalculated every night.

Price $9.99
Typical for this category: the median of 1,208 items is $9.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typePCIe Riser Cable

Questions about this item

How do I choose between the different PCIe slot widths this riser supports?

The adapter plugs into any 1x, 4x, 8x or 16x motherboard slot and routes the connection through a 60cm USB 3.0 cable, so you simply match the slot you have available.

What does the 1X to 16X label mean for graphics-card performance?

The card negotiates at x1 electrical width, so bandwidth is limited to a single lane; set the BIOS to Gen 2 or Gen 1 if the GPU is not detected.

How does the Molex 4-pin connector affect power delivery?

It draws auxiliary power directly from the PSU, reducing load on the motherboard slot and providing voltage regulation with three solid capacitors and overcurrent protection.

More in Worldwide Power Cords

Similar items