EN-Labs SFF8088MM1M SAS cable SFF-8088 male to male 3.3ft 4 lane
A 3.3 ft four-lane SAS cable with SFF-8088 male connectors on both ends, supporting 24 Gbps total throughput
- Connector count2
- Product typeSAS Cable
- Overall length3.3 ft/1 Meter
- DetailsConnector A: Mini SAS 26pin (SFF-8088) Connector A: Mini SAS
- Key featuresMini SAS Cable is designed for the connection of SAS devices
- High-speed 24 Gbps aggregate throughput with four 6 Gbps lanes
- Secure latch-equipped SFF-8088 connectors prevent accidental disconnection
- Durable die-cast zinc connector housings withstand repeated mating cycles
- One-metre length suits typical rack and enclosure spacing
- Connects SAS controllers, drives and SAN storage arrays
External SAS Cable 1m 4-Lane
This one-metre EN-Labs cable carries four lanes of SAS traffic between two SFF-8088 ports. Each lane runs at 6 Gbps for a total of 24 Gbps. The 26-pin plugs feature a release ring that locks the connection and resists accidental disconnection. It is built for external controller-to-enclosure links in servers and workstations.
Suited for external storage arrays
Administrators wiring JBODs, tape libraries or SAN shelves to a RAID controller will find the length and latch useful. It is not for internal backplane cabling or any build that needs an internal mini-SAS connector. Buyers who need longer reach or a different pin count should look elsewhere.
Four-lane 6 Gbps per lane throughput
The aggregate 24 Gbps bandwidth is the figure that decides whether the cable matches the controller and enclosure spec. Verify that both ends use SFF-8088 and that the link speed requirement is 6 Gbps per lane before ordering.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 68% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SFF8088MM1M |
| Product type | SAS Cable |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 3.3 ft/1 Meter |
Questions about this item
Does the 3.3 ft cable length limit where I can place my SAN storage relative to the server?
At 1.0 m the cable reaches adjacent racks or shelves but not distant cabinets; plan device placement within that distance.
What bandwidth ceiling appears first when the link runs continuously at 6 Gbps per lane?
The four-lane SFF-8088 interface caps sustained throughput at 24 Gbps total, so the bus itself is the first bottleneck.
Will the die-cast zinc connectors add noticeable heat or power draw during all-day operation?
The passive cable draws no power and generates no measurable heat; the zinc housings only improve durability and latch retention.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
LetLinkSo LLS-CB-1MC1MC-02 PCIe 5.0 MCIO x4 to MCIO x4 cable 1.6ft (50cm)
- PCIe 5.0
- Black





