We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue thermal pad 100x100x5.0mm soft silicone square

EN-Labs

EN-Labs Thermal Pad 100x100x5.0mm 3.2W/M-K Blue

SKU CH-3F5P-X0WWG

A 100 x 100 x 5.0 mm blue silicone thermal pad rated at 3.2 W/m-K for filling gaps between chips and heatsinks

  • Key featuresSelection of thermal silica film main objective is to reduce
  • Reduces contact thermal resistance between surfaces
  • 2 W/m-K thermal conductivity for efficient heat transfer
  • 0 mm thickness fills larger component gaps
  • Electrically insulating with >4 kV breakdown voltage
  • Operates from -40 °C to 200 °C

EN-Labs Thermal Pad 5mm Thickness

This 100x100mm silicone thermal pad suits DIY repairs on GPUs, northbridge chips, LED modules and similar components needing a 5.0mm gap fill. Its 3.2 W/m-K conductivity targets moderate heat-transfer tasks in consumer electronics and PC builds. The blue colour aids visual identification during assembly.

Soft Conductive Silicone Build

The pad’s malleable texture conforms to uneven surfaces without mess, while slight tackiness holds it in place during installation. Electrical insulation rated above 4 kV breakdown voltage protects adjacent circuitry, and tensile strength of 180 kgf/cm² resists tearing when repositioning. Continuous operating range spans -40 °C to 200 °C for demanding environments.

Fixed Thickness Limits Reuse

At 5.0mm thick the pad cannot accommodate thinner gaps without compression that may reduce performance or stress components. Builders needing different gap sizes must source separate thicknesses, and the single 100x100mm sheet yields limited coverage for larger heatsinks or multiple devices.

How it compares

Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 70% of the 498 comparable items (median $12.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What thermal conductivity does the 5.0 mm pad provide?

The pad conducts heat at 3.2 W/m-K, moving warmth from GPU, northbridge or LED chips into the heatsink across the full 100 x 100 mm surface.

How much clearance does the 100 x 100 x 5.0 mm pad need?

It requires a flat mating area at least 100 mm square with a 5.0 mm gap between component and cooler; the soft silicone compresses slightly to fill uneven surfaces.

How do I install the pad without trapping air bubbles?

Clean both surfaces, peel the protective film, lay the pad evenly from one edge to the other, then press the heatsink down firmly so the slight viscosity spreads the material without gaps.

More in Thermal Paste

Similar items