We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White vertical wireless charging stand with angled phone rest and Micro USB port

EN-Labs

EN-Labs WLCHQ700 Qi Wireless Charging Stand 10W 7.5W 5W

SKU CH-RQ46-Z9XXM

A Qi wireless charging stand delivering 10 W, 7.5 W or 5 W output with intelligent mode detection and over 72 % efficiency

  • Key features5 W ,7.5 W and 10 W three Charging modes intelligently ident
  • Charges Samsung at 10W with QC 2.0/3.0 adapter
  • Charges iPhone at 7.5W with QC 2.0/3.0 adapter
  • Charges all Qi phones at 5W with 5V/2A adapter
  • Three power modes identified automatically by the stand
  • Charging efficiency exceeds 72% across supported frequencies

Charging stand with three power modes

The EN-Labs WLCHQ700 is a Qi wireless charging stand that delivers 5W, 7.5W or 10W depending on the handset. It is aimed at owners of Qi-enabled phones who want a single upright holder for desk or bedside use. The stand automatically detects the device and selects the appropriate output level. No AC adapter is included in the box.

Upright holder with Micro USB input

The stand holds the phone vertically so the screen stays visible while charging. Power enters through a Micro USB port and requires a QC 2.0 or QC 3.0 adapter for the 7.5W and 10W modes; a 5V/2A adapter is sufficient for 5W operation. Charging efficiency exceeds 72 percent at a frequency range of 100 to 205 KHz. Cases up to 4 mm thick without metal or magnetic parts can remain on the phone.

Check your adapter and case before ordering

Verify that you have a QC 2.0 or QC 3.0 power adapter if you want the faster 7.5W or 10W speeds; a standard 5V/2A charger will limit output to 5W. Ensure your phone case is thinner than 4 mm and free of metal plates, magnets or credit cards, otherwise charging may not start. The stand only accepts Micro USB input, so a USB-C power brick will need a suitable cable.

How it compares

Measured against everything we stock in Charging Stations & Cables, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 77% of the 9,983 comparable items (median $18.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Labs
Model nameWLCHQ700

Questions about this item

What charging speed does the Qi interface cap at for an iPhone 8 Plus?

The stand identifies the iPhone 8 Plus at 7.5 W maximum output, which is the highest rate the Qi handshake allows for that model.

What physical clearance does the stand need for a phone case?

Cases up to 4 mm thick without metal, magnets or credit cards will fit between the phone and the charging coil.

How do you power the stand so it delivers 10 W to a Galaxy S9?

Connect the Micro USB port to a QC 2.0 or 3.0 adapter supplying 9 V / 1.67 A; without that adapter the stand falls back to 5 W.

More in Charging Stations & Cables

Similar items